Viewing all customer Discussions for:

Door & Window

Derek from Window E-Store suggested I contact you. My 81-year-old neighbor needs a new balance on her window because the foot broke off (see photo). I don?t know the right names, but this is what I found: The three-sided metal channel is 28" long, ½" wide on the three sides and has 28C stamped on it ... (cont.)

Hello, I need to replace this lock. It has two different part numbers. I included them in my pics to ensure accuracy. Please let me know if you have this lock. Thank you

My name is Edward.We have approximately 10 windows needing repair Im sending a couple of pics of the parts needed this one is 24 inches long

I have a sliding patio door with this stamped on the door: "acorn series 1200 cgsb 82-GP-2A" The current handle does not even have the capacity to latch, never mind lock, and so, I would like to replace it with a door latch that actually latches and at least, secures the damn thing from the ins ... (cont.)

Hi, Experts, My old house has 7 custom storm windows which are large and heavy and require the pictured fasteners to hold them in place. We bought the windows in the early 1980's from a company long out of business. Many fasteners have gone missing, and most that are left are corroded. Can you fin ... (cont.)

Triple Track Storm/Screen Window Tilt Corner 3/16" x 3/16" x 1-5/16" What part do I need?

the window is 44 pounds, vinyl frame. the existing balances appear to be 35/64" deep by 1- 17/64" wide with 3 coils. I inadvertently damaged them while installing the window. Have been unable to contact Crestline. I need 2 pair, plus do you have a spreader tool to remove/install them? Thank you, ... (cont.)

Need asap

Looking for the replacement crank for this window. It says WRIGHT on the metal piece connecting to the window . Inside the window near the crank the arm widens quite a bit and has teeth built into it.

Looking for rollers for our screen door, and cannot find this type. Where are they available?

the metal is 30" long and they are 1/2" wide. the number stamped on them is 2930. the pieces that are attached to the side of the window frame seem like they are too narrow to catch the window. I have included a picture of one of them. The stops are 3" long. i am trying to identify the corr ... (cont.)

Cannot find exact match because lengthis not round number. Single hung AP-C40-60x36. SERIES 5421/5431/ 5471. can you help us find the exact match?

I need 4 balances of both of the sizes pictured (8 total). I have not been able to identify the window manufacturer. The house was built in 2000 by Centex.

Wright company made part. The number on back of part is 07702-00 It is a crank unit for opening and closing the window.

Do you have a replacement handle set for this Cole Sewell door? Or can you tell me where to find a replacement. Thanks

I have Crestline windows with a code stamped inside the pane that is: X15901Y27C3M. I am having a hard time cranking in and out my window and think the crank and arm needs replacing. Could you tell me what part it is that I need? I need both left and right cranks in stainless steele please. B ... (cont.)

How much weight does a series 751 42HD and 42 TG channel balance support?

School Building is 1975, replacement windows circa 1995? EFCO? double hung. Balances shot. where can we get replacement parts and how to identify the end caps / clips?

Hi,I'm looking for replacement balances that look like this(see pics). It is 1/2" wide and printed on it is 6.5 ( I imagine that means lbs) and 33"I see you have a similar balance the 165 egress that is 3/8 wide. Would these work? I"m really stuck as I can't seem to find a replacement. Would I also ... (cont.)

Mr Handyman will install