Viewing all customer Discussions for:

Door & Window

Dear Vendor- I have several broken balance shoes on my 8 year old MI windows, model # BB740. Although I do not see anything which looks like a match on your website, I decided to send you some photos and let the experts tell me if they have anything that will work. Thanks, Dennis ... (cont.)

Looking for a whole coil balence assembly, including coils, coil housing, and pivot.

Not sure the part number for it. It's for bay window. I do have a window locking mechanism that was part number 38-013 if that helps. Thanks.

I would like to know if you stock this item?

Good morning. I am in the process of replacing a Swisco Window Dyad Crank, 5" and see that there are 2 like parts - 39-089 and 39-187, the exception being the crank arm has a different zigzag shape position. Which Dyad part number between 39-089 and 39-187 should I order from your parts department ... (cont.)

Balance rod 21? long 1/2 wide 2090 30 B81 tf

Looking to replace several of these in white, can you help please?

this came out of current working window I need to find suitable replacement parts

I need 3 sets if CV BAL and corresponding shoes, fir a 14 lb sash. pictures to follow. I also need 5 sets of insert tilt latches. I recently purchased some but they were too small. The ones I purchased were 26-266 and 26-267. These were smaller than I needed. The size I need is 2 7/7 long. The "T" i ... (cont.)

I am looking for this glazing bead, any help would be greatly appreciated. Approximate window installation, 1970's.

Pivot lock shoe. I believe the measurements to be 1&1/4"x 9/16 x Approx. 2" tall

while searching online, I came across you guys. I can go back for better photos. 8 out of 10 windows don't stay up. apparently the balance popped out of shoe. Q1 can you tell by the photo which shoe I would need? also the spiral is 29 X 5/8 (rough est w/o removing). Q2 is the flat end (bottom e ... (cont.)

Side load sing hung vinyl window. The part that holds the channel balance in the window is half gone. The window on the left still holds the channel balance down. The window on the left has nothing it hold it down. I need a part to hold the channel balance inside the window . Help?? I need 3 of thes ... (cont.)

I have one window in which the piece broke allowing the window to open, but not stay open (See pictures 0949 and 0950). It appears to be the plastic connection / roller. I have another window in which the spring / coil is not in it's white casing (See pictures 0946, 0947 and 0952). I don't know anyt ... (cont.)

I am looking for the spring loaded pins that spring in and out into the window sash that when pushed out keep the windowvfrom falling open when unlocked.

Will a Kinro window crank work with the Truth Pivot Shoe Roto Awning Operator 39-312? Here is a picture. Thank you

Windows were installed over 15 yrs ago??? No identification on windows to indicate mfgr. Missing multiple sash stops. Would like to replace. Thank you for your help.

I am working on a project where I have to restore old single hung windows. I need some hardware such as sash weights and any other hardware that will be needed. Can you help with this? The windows are going to be single pane wooden windows. Thanks for your help.

Attached are photos of the channels removed. 30? long, look just like 380s, except the top is flat. Came on Kinco window, weigh 30.5 lbs. Please devise.

I have a hurricane sliding glass door. The latch has broken. The top and bottom screw holes are 11 inches apart. Can you please help me replace.