Viewing all customer Discussions for:

Door & Window

I need the operator exactly like 39-172 in white, except the part of the operator that is shown in the illustration that is 5 inches long is only 4 inches on my operator. Is this available. Everything is identical to my operator except that last link that connects to the window.

Need the Vinyl Window Beads but cant seem to find these exact ones .. hope you can help me with this. I need all three vinyl beads in the color white. Sincerely, Jody H. Glass Etc...

Good morning, If possible I would like to purchase the needed parts before disassembly. I will need to replace 2 sash balances. Anderson Vinyl double hung, etched # is CIG 23-87. The glass size is 16"x 28 1/2". I hope is enough to ID what balance I'll need. Thanks for any help you can ... (cont.)

I have two different types of balances that I need to replace and I am having a tough time identifying them. What I do know: Balance A Width: 9/16" Depth: 5/8" Channel Length: 37" Stamped on end: 36 B B.S.I. Balance B Width: 9/16" Depth: 5/8" Channel Length: 36" Stamped on en

I have need of 2 replacement operator covers for a Pozzi casement window installed 1998. I also need two casement latches for the same window. Pictures included I have the original order tag that was on the window. That information is: A.B.S. - S 45002593 04 19-JAN-98 NC

I need to replace this broken handle/lock set. I have looked at Lowes & Home Depot but can not find anything to match. I also can not find any markings or manufacturer information on the door, handle/lock set. The door was builder's grade new construction from 12 years ago & the supplier that the bu ... (cont.)

I've installed at home and need to be replaced balances with stamped# 8 22 B with a metal lenght of 23 inc.

Hi - I am looking for a replacement pivot locks for my windows (or potentially the whole channel balance if needed). I have some from around 1980 that have "2380" stamped on the channel balance. I have enclosed pictures of the balance and the lock. The lock should be 1.25 to 1.5 inches across, 0. ... (cont.)

I need to replace what is in the photos attached. I didn't see any identifying markings. I believe it is called a "Top Sash Clip". I just need to know which it is.

What is the spline size of the item 39-139 casement operator? I am looking for this type and find 5/16 splines but can't find a matching set of an operator and folding handle. The folding handle #39-205 at 11/32 doesn't work with 5/16 operator, as it strips out. Thanks Steve

1. For a window with a lower sash of 34" wide x 34" tall and a top sash of 34" wide x 33 " high, what would be the correct size for spiral balances? 2. I would like to order S500-30 spiral balance but the spiral balance I am replacing has a black tip. I don't see a black tip in your catalog. Than ... (cont.)

5/16 x 1/2 x 1/8 deep, flange is 3/4 wide.

CAN YOU CROSS REFERENCE PART #25 4760 FROM INTERNATIONAL PRO SOURCE? BLACK, FLUSH MOUNT, LESS KEY,NOTE WIDTH IS 1", SLIGHTLY WIDER THAN NORMAL AL

Need to replace crank very similar to what your site shows but the arm length on the sash is 6 1/4" long. Do you have that? Ss

My house was built in 1980 and several of the clutches (I don't know if that is a correct term) and spring (balances) need replaced. I can't find these parts anywhere. Many of the window are similar to old Marvin windows (such as mouse trap latch, spring screen parts etc), but I can't find the piece ... (cont.)

The sweep on the bottom of the storm door seems to be falling apart. The only tags I can find on the door say "Forever View serial A-1399413". The storm door has one very large piece of glass. Handles and lock on the storm door are brass and there are two closer mechanisms. The house is 14 yrs old a ... (cont.)

Hello, I need a replacement spiral balances for an Alcoa tilt window. It has a 3/8"x30" plastic tube. The actual metal spiral piece is 31" and the tip is white (as seen in the picture.) Can you help me find the right replacements? Thank you in advance for your help!

Do you have a hinge side piece that will fit in the track that is same as the Top & Hinge side, I ahd to cut off the traier in order to get the flat piece to fit into the rails that are on the top and lock side, I have the same track oh the hinge side, I belive that the track is 1/32 wider than 13/3 ... (cont.)

I have purchased a new lock but have not inserted it yet. Which way does the hook go into the door jamb--does the hook go down to latch or up into latch? Is the top of the latch where there is already an existing screw as shown on your pictures of mortise lock? Thanks for your help. BLL ... (cont.)

I have viewed glazing bead # 55-029 in 3' and 6' lengths. Is specific this particular bead specific to a window brand or is it universal?