Viewing all customer Discussions for:

Door & Window

I want to order four (4 Top Sash Guides) Part # 18-033 for my window. My balance is 15 inches long and measures exactly 1/2" wide. However, your part #18-033 recommends using a balance that is 15/16 wide. Part # 18-033 measures exactly to the piece i am replacing. My only problem is the four (4) B ... (cont.)

I need instructions on how to replace the 19-039 Top Balance Attachment. Thanks,

I need to get replacement balance rods for some KINCO windows - seems that they are an 'odd' size.... Mine measure 12", and have a stamped number on the channel that reads: 1140 I cannot locate the correct replacement piece on the web - i might be looking in the wrong place?!

I have a home built in 1989, with Jordan single hung windows. I need several lenghts, the same style. The channels are stamped with 28 4 followed by a D1, can you supply proper parts? Thank You !

I have an apartment building with aluminum single pane windows, installed 1963, which have the Series 500 spiral balances. However, the plastic shoes have broken off over the years. They appear to be the 15-009 shoe in your catalog. However, I find no me

I am searching for replacement crank handles for wood casement windows. Unable to find manufacturer name on window frame or metal hardware. Each handle has the letters R.O.W inscribed on it. They are 4" die cast (2) piece metal with a set screw at the 3/8" opening. Home was custom built in 1980. ... (cont.)

I AM TRYING TO ORDER A REPLACEMENT FOR MY SASH BALANCE, I THINK I CAN USE YOUR ITEM NO: S377 - 30 INCHES WITH TOP:19-018 & SHOE:15-005. THE STAMP ON MY CURRENT CHANNEL IS I 29-5 AS IN THE ATTACHED PICTURE. I NEED TO NEED KNOW IF THIS IS THE SAME AS THE OPTION 2950 ON YOUR WEBSITE. THANK YOU. ... (cont.)

In addition to 15 of your 15-070 Pivot shoes, I need some balances. Your catalog does not give a good guide to what balance I should order. I need four 23" long balances (.54" dia) I am assuming the ones you describe as 5/8". The window weight is 31 lbs. Window was manufactured by thermo guard. ... (cont.)

I'm looking for anderson casement/awning crank extensions. Your universals/extensions/loop products look like they might work, but I read in one response to a question that they wont work in an Anderson application. Do you have anything that will work in an Anderson application? If not, any idea whe ... (cont.)

we need replacement balances for a window it is about 1/2"=5/8"? 22" long with a blue tip you do not offer the blue tip option when ordering. does it matter? What is the difference in tip colors? Thanks in advance for your help!

We have a window that can be open by sliding up and down on both sides of the frame. There is a coiled spring that help to carry the weight of the window. The coiled springs are broken and we would need a replacement part. We are not able to identify the window manufacturer. There does not seem to b ... (cont.)

Can your rubber door sweep replacement part be purchased in a 43 inch length? I have an extra wide door. thanks.

Is there a left and right for the 18-166?

I have what I believe is a Series 770 which measures 28" long. The only stamp on it is UNIQUE 27-D-40. Should I choose option 28D when ordering? The window weighs 25 pounds. Also, is it necessary to replace the pivot lock shoes? They appear to be OK, and I couldn't find one that looks like mine ... (cont.)

Hello, Can you tell me the color of the keeper and with the pointed part positioned on the top when screwed on is there on hole on top side? Thank you. Donald

I am looking to replace some external tilt latch locks. I am having a hard time finding the correct measurements. I have attached pictures for you to see. I have measured 3 1/4" across, 1" down, and 2 1/4" from screw hole to screw hole.

I have looked at the guides on your site and I am not able to tell which one would replace this. Are you able to help me? The length of it is 1 11/16".

Greetings I need to purchase a number of window lift's that are the same size as 20-010, but would like a nickel finish instead brass. Do you sell the lift's in a nickel or something similar? thank you

I have 3 doors using Stanley rollers need 6pc. 4012 bracket with 4011 roller attached 6 pc. 4013 bracket with 4014 nylon attached Mike