Viewing all customer Discussions for:

Door & Window

I cannot confirm the match by the manufacturer or tag number however the 26-120, Top Tilt Latch, is a popular latch used by many manufacturers. See the detailed measurements for this product on our site to compare with your sample.

My patio screen door's roller assembly looks almost exactly like this one. The 1/4" measurement is dead on, but my roller wheel is 3/4" instead of this one's 1". Do you have another version of this with a 3/4" wheel (preferably metal, not plastic)? If not, would the 1" wheel work? ... (cont.)

I have a Nu Air non tilt window, single hung that has a damaged channel sash balance. The damaged part has the following ID Number: #29 5 fw cmc 10 Can you help me identify and order the correct replacement part?

We are unable to find the pivot pin (for the window) that matches these pivot lock shoes, even in your extensive catalog. Do you have them, or can you get them as well? Attached is the pictures of the pivot lock bar I am searching for. Thanks in advance for any assistance.

I'm trying to replace a glass sliding patio door latch. This was one was made by Delta Industrial Systems out of Miami, Fl. The distance between the screw holes is 6-5/8". It has the round knob that you turn to lock it. There is no keyed lock on the outside. The latch locks down. I could take pictur ... (cont.)

Hello, I have Pella glass sliding door vintage 1995 which I found the bill from when I bought it... the model number is DCS 9681. Seems not to match with for 701 or pre 701. Can you tell me what rollers I need for DCS 9681. Thanks in advance for your help

We already have screens with this type of top hanger. I want to build a set of clear plastic storm covers and only need the keeper pieces. Can I purchase those separately?

Can I order the sqare spindle for the Forever inside door latch (40-175)and if not, what is the length and width of the piece so I can find one? Thanks

We've purchased a home built in 1985 that has Anderson casement windows. Most of the windows are tall and long with the hinge mounted on one side, a crank at the bottom, and a locking mechanism built into the window frame on the other. There are also three small casement windows in the house that ... (cont.)

The 40-032 has mounting holes that measure 1-1/2" installation hole center to center; the 40-033 has mounting holes that measure 1-3/4" installation hole center to center.

Can't figure out who manufactured the windows in my friend's home. They are prefab double pane, double sash windows installed about a decade ago. The windows are in good shape but are missing a few pivots (Swisco part number 26-040 is the closest visual match). I'm would like to find out the manu ... (cont.)

If I ordered a pan am/daryl window crank (39-016 & 39-017), would the other parts be included like the shoulder screw and the screws to mount the crank onto the window frame and any other supporting parts?

Unfortunately we do not sell the locks from the 90-095 lock and keeper set separately.

SWISCO's product 40-150 storm door handle only turns, it does not activate by pushing.

Hi...I was told by MW windows to contact you folks to see if you have a replacement balance asm for my windows.Both balances broke & my window will no longer remain up. The windows are MW Twinseal and the chord which comes out of the assembly attached to the top of the sash by a clip that resembles ... (cont.)

I need to replace several trolleys on some sliding doors. The rubber 'tires' on the wheels have fractured. I have just purchased three replacements from you, but they are the wrong size. The steel body of each trolley is 1 9/16" long and 9/16" wide. Each wheel including 'tire' is 7/8" in diame ... (cont.)

I have need for a set of two Balances very similar to your S770-28". However the balances have 27E stamped on them. That does not match any specs on your S770's. In addition I need a set of Pivot Lock Shoes like your 15-184. Questions are: How to connect Pivot Lock Shoe to Balance? and Which w ... (cont.)

Would you know if Product code 26-170 latch would fit a super seal 300 series window Thank you Helen, B & R Glass

I need four crank handle 12 spline 7/16" bore. Your T handle probably wouldn't have enough leverage,do you have any 7/16" 12 spline regular or preferably folding handles in bronze or white if necessary. Old handle said FEIN in a oval logo.

I have balances that look like yours but I am not sure. The only marking on it is on the 25" channel is "a 2440".