Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

My window crank is no longer working and I think I need to replace it. The cut out for the crank is 5in. The long arm that says entry gard truth is about 9in. The part that says 20810 is about 4.5in. The part attached to that says L30841.The part attached to the bottom of the window that swings ... (cont.)

I was wondering if you could help me identify this casement window operator it's a Delmar window with the US and Canadian patent number on it

Hello, I've been having difficulty locating a replacement crank for this Window. Any idea?

Need these parts

Crank still works, but 3/4 to closed, it hangs up. I can then pullk the window in a biut, and the crank with then continue to full closure. Set scre on crank handle is tight. Crank "axle" seems to be loose. I think that several teeth on the mean crank gear are broken.Oliver

These are for 1988 vintage Hurd wood/clad casement windows Do you have this mechanism? don't really need any crank handles or covers unless the originals won't fit the new mechanism. Please advise

Hi there, I have 4 upstairs windows that can't open- seems the crank operator is broken. One window stayed stuck open when we opened it up not knowing it couldn't close! We had to remove screen and manually close it our first night in our home when it started raining. Based on my photos can you plea ... (cont.)

Not sure if this is a handle replacement or the whole deal. I believe the longer arm is 8" and the other is 4".

Need help finding a replacement part

Hello - unsure who made our windows (4th owner of house) - these are double paned and may be gas filled. High winds nearly blew out an open windows frame, and realizing many of the mechanisms and seals may have to be replaced in the 20+ window frames after 32 years. Can you help us identify all t ... (cont.)

Help , the arm mechanism is working , but gear box is missing parts

From '94 in eastern Mass. The part which attaches to the bottom corner of the window pane, and slides side to side, is rusted/corroded on several windows. This has caused them to want to be stuck in the open position. And to close them for now I need to push in from the outside while someone else cr ... (cont.)

We have a pair of 25" W x 50" H casement windows where the right side window crank is too worn to open and close the window. The crank handle easier comes off. You can see the gears have worn out. The arm extending out from the mechanism is at least 12" long. We are looking to order the correct rep ... (cont.)

Looking for a single arm operator - see image

Looking for a casement crank and handle

I am in search of the attached window operators. I purchased a home that has "old" windows that crank open and a few of the operators are no longer engaging the gears. I understand from my inspector and a contractor that the windows were manufactured in Minnesota by a company now out of business. ... (cont.)

will need 2 left and 2 right and 1 extra handel

I ordered operators (39-156 - Caradco Window Crank, 9-1/2) but they do not work. I believe the link arm is too short. can you tell me which operator to order

Looking to replace all or part of this hardware. Mike. Thanks

Hello, We need to find matching parts just the trims and covers in black or dark bronze color. We are painting the wood window frames in black and would like replacements that match the new color scheme. Is this something you can help us with? Thank you!