Viewing all customer Discussions for:

15-047 Pivot Shoe, 5/8" Thick

I am looking to replace some pivot shoes, spiral balances and surface mount tilt latches. I think the windows are manufactured by American Craftsman. Img 8804 surface mount latch has 2" on center screws and a 7/16th offset, and a number on the back L 307. The spiral balance Img 8805 end that connect ... (cont.)

Good day, I'm trying to find 16 of these older style locking pivot shoes for channel balances. The shoe is 1-1/2 inches wide, about 2 inches tall and 5/8 inches thick. Honestly never seen one so wide before!!! If at all available I would also need the cam bars. Thanks, Keith.

Looking for window pivot shoe and corresponding spring

This is from a aluminum window. I could not find any numbers or markings. The size is 2 inches long by 11/4 inches wide. Thank you. Anne

I cannot find the exact style can you pls take a look and let me know what you suggest john Thnks

Hello, Thanks in advance for any assistance you can give me. I need to repair about 8 windows the bottom sash won't stay up, these are pictures of the shoes and the ends of the spiral balancer the shoe on the left is the lower sash. It appears that the shoe may have disintegrated there's nothing ... (cont.)

Hello I need a couple of plastic lifts that are 1.16 inches wide and 2.12 inches high. You can probably go a bit smaller on the 1.16 if needed 1.16 inches wide 2.12 inches high Plactic window lifts Everything seems to be 1.250 wide

the shoe is 5/8 thick 1 1/4 wide 2 inches tall at furthest point8

Need to identify this shoe and find a replacement. This is from a replacement window that tilts.

Hi, This pivot lock shoe is from a spiral balance type double hung. Made by PGT window company in Florida. (Model DH 560 series) Hurricane impact glass. (Discontinued, and PGT is of little help). Do you have these, or know where I can get them?

Hi,Can you help me with some replacement parts for my vinyl window balancers?Thanks,Don

Blue Tip 26 e3/16 long, 1/2 diameter Thanks

For Traco tilt sash metal window frame. The shoe goes with a Series 85 tilt balance. I am trying to find the correct replacement shoe.

Good day, I am looking for 4 -right and 4-left tilt latches for my double hung windows as well as 36 pivot shoes for my two-panel sliders. The tilt latch has a large "M" molded into the bottom. Also pat#5.139.291 and a separate number 75 molded as well. The pivot shoe has nothing molded into it. ... (cont.)

This part was originally installed with Aire-Tite tilt-in windows.

It's may be tough to see but I'm in need of replacing a couple of the attached shoe sash carriers. Please let me know if you are able to determine what I need from the images. Thank you

Hi I'm looking to replace 4 shoes - this is the only one that didn't get mangled. 2" x 1 1/4" x 1 5/8 (thickness) Thanks for your help! Paul

We are looking to replace these pivot shoes. They are designed for interchangeable inserts, but the replacement doesn't need to. It just needs to work with our window.

Need part number for Spiral Balances,3/8 30" long blue tip, 3/8 34" long Orange tip Sash Pivot Bars,.327" wide,.374 deep, center bar is .138" Bars are plastic, upper are broken in windows. Lowers can be seen in photo. Pivot shoe is 2" long, 1 1/4 wide, 5/8 thick, which I think is your 15-047 shoe? ... (cont.)

I have a few windows that won't stay up. I'm looking to fix Only one right now to make sure it works out. Can you please email me what balance and shoe I need. Thank youBiagio