Viewing all customer Discussions for:

39-187 Sash Dyad Crank, 5"

Windstorm damaged another window with same parts as shown in picture

Handle is not always turning and we have to push the window shut so we can lock it. I would appreciate it if you could identify the correct replacement part. Thank you!

your 39-187/188 match my old cranks exactly accept that the bottom arm is 5 inches on yours and my originals are 4.5 inches from the pivot point to the end where it clips to the windows.will these still work? is that extra .5 of an inch going to keep the window from closing?I do not see any offering ... (cont.)

I ordered part # 39187 & 39188 because according to your site those where the replacement. The arm that is attached to the gear is different and does not allow the window to close. Is there a different part that I needed or do I need to position the arm in a different spot on the window? Any help wo ... (cont.)

I bought a 187 and 188 operator from here but the arm that attaches to the window is half an inch too long(5 inches total) do you guys have another one that iss exactly 4.5? If not how can i make the one i bought work for me?

Looking for the correct window crank assemblies. Not sure if I need the parts shown in the photos marked #4 and #5. If the components in photos 4 and 5 cannot not be separated or disconnected without being damaged, then please provide part numbers for all of the components shown in the photos from ... (cont.)

Hello.. Please verify if this window crank is a 39-188? the Arm measures 5" and the mounting spread is 5" but looks like the inner part is more like 3" ?

Mounting hole distance is 5 inches exact but the arm measures 4 1/2 inches

Can someone help me with an identification for the Truth Hardware operator pictured and with how to find a replacement?

The arm with wire (just added today so we can open and close the window at night) is broken. It seems that the bolt that connected to the window rusted and broke. It's strange but I can not get the bolt out of the arm to try and replace with a new one, even though it broke off. Is there a replaceme ... (cont.)

I purchased four cranks order number 139-1343 but I believe the Z angle is too long the window won't close correctly thank you. I think the Z angle is too long

Stuck at determining which cranks I will need.I can't tell if it's the 39-188/187 or the 39-090-089 combo based on the orientation.

Please have a look at my photos and let me know what can be used in its place. Thank you

As you face the Nami bay window from the inside the left hand crank mounting bracket and screws are stripped (last of 4 pics). Can no longer open for additional pics. Took photos of the right hand crank mechanism and window labels.

Looking for hardware for our simonton bay window, the side windows open, left side window opens right to left and the right side window opens left to right. Looking for the pivot on top for both left and right window as well as the window crank mechanism. I have also included a pic of the weather ... (cont.)

I need the silver piece that the window sits in on the track

The handle says Alcoa and a part of the connection has the number 30744 stamped on it. I have two identical windows except one crank mechanism is missing. Both windows lock on the right hand side. Thanks

The attached photos show the crank hardware of a wooden casement window (vynal clad) double casement with a center stile that thieves recently forced open to gain entry damaging the hardware as shown. The only identification we can find is embossed delmar made in canada. If you can id the part from ... (cont.)

Do you have these parts

I'm in need of both a left and right crank assembly but have no part numbers . They have "true latches " but the crank looks closer to you're 39-407 with an extra arm .