Viewing all customer Discussions for:

39-216 Single Arm Window Crank

I have 2 out of 4 controls that are broken on 4 bathroom windows. I need 2 left and 2 right replacement mechanisims. Can you help me confirm the correct models? Thank you! David

can you suggest a part that will replace this mechanism. It opens but will not close.

Looking to see if you guys have any of these window cranks available. If you do, you can also contact me at 805-332-4477 thank you

I have a Marvin casement window w/ 40574 stamped and the arm is approx 8-3/4" long (from center of nylon bushing to center screw hole aligned with the crank). From center of nylon bushing to end of crank is roughly 11-1/2" See photos for more info. Can you pls tell me part # and/or link to Swisco. ... (cont.)

The bushing has failed the rotor crank guts pull right out. Nothing holding it in place any longer. I'm in the need of replacement parts for three windows.

Hi, Can I replace stem. handle and cover, or comleete mechanism for this RT side casement window?

Hello, I am looking for this operator for a small casement window. Its a truth brand and the arm is 8.5 center of gear to center of nylon glide. Thanks

Operator slips off window and the gears are stripped for the handle , need new mechanism . Window is original to our house, b uilt in 2011. FIRST TIME DOING THIS type of job

I have a broken part

Trying to replace the assembly for a right and two left casement/window crank assemblies. I don't see any part numbers, but see "truth" on the arm and patent number 4,480,075.

I have a vetter window that was installed in 1998 that needs a new threader piece I think. The current one seems to be missing some metal on the end so the window will open but not close. The crank just comes out of the window. The arm says 6797 ams. Do I need to replace the whole crank and what ... (cont.)

I need 1 pair of balancers overall length of 22"; and 1 truth 9" long single arm coastal operator for a Left hinge casement; and 1 Milgard auto lock.

These windows were manufactured in Indonesia. I can not find part numbers or manufacturer other than on the crank handles, the numbers 22 and 15054. I need to replace several and would prefer to do it in stainless steel if possible. Can you identify and can you source this item?

Need two window crank operators and handles. Both windows open out to left when facing the windows inside the house (open to the right when facing windows outside of the house). Windows are MIL-027-4 Seris 6310. Don't need exact window crank operator, just something that fits and where the handles ... (cont.)

include casement guide approx. 11-1/2" long. also, need handle and screw crank

Semco Window was installed in 2002. Crank is on the right side when looking out. Appears to have a single straight arm about 9 inches long. Actual part has "Truth" name on the arm. Also need a white or beige crank handle.

I needed to pu ll the window apart to show you that my Vetter casement window has three arms. The longest one is the main arm and it is 9 and 1/2 inches long. The other two are 7 and 1/2 inches long and the third is 5 and 1/4 inches long. Do you have a replacement part that I can use?Thank you for y ... (cont.)

arm length is 8-1/2 long

Hi, We have very old casement windows and the handles are starting to break off. Inside the handle, it says 45054. Do I need to replace the entire mechanism? It looks like this one is more than just the handle. What do you recommend? Eva

the overall body width is 5". The overall arm length is 9 1/4", rivet to rivet is 8 1/2"