Viewing all customer Discussions for:

15-104 Caradco Friction Shoe

This part that connects the spring to the window is broken on both sides, dont know what it is called.

what is the measurement of CARADCO FRICTION SHOE Product Code: 15-104

Don?t know window make. Part shown with tape is broken and looking for replacement. Part shown holds window via pin and slides with the aid of attached spring which attached to the top of slide which is broken off Bottom of piece hold window via pin. Top (broken off) attaches to spring which when ... (cont.)

I need help in indentifying this all spring window balance for a double hung window.

While washing windows I somehow managed to break the tab that supports the window on both sided of the lower sash. The part is 1 7/8" long and 1/4" wide. I did not measure the depth but can unscrew it if necessary. I believe the window are from Crestline. Do you have a match? Thanks. Picture shows b ... (cont.)

This is from a Malta window as far as I can tell. It's .5" wide and 2.5" long. Do you have this part? Thanks, George

Hello, I need 4 of this part for which I do not know the proper name. Anyway, they are for a Wenco tilt window and are the part that the pins on the lower window fit into. The top part that is broken off is where the string attaches and id the string on the other end goes to the spring balance. The ... (cont.)

I believe they are Hurd Windows, no markings. Need shoe and a few coil springs, maybe. 10 windows, double hung, to repair.

Hello! Do you think you could use 15-104? It looks roughly the same.

Hello, I'm trying to find a shoe for my window and cannot see anything on your website that matches. Attached are 3 pictures a picture of the shoe in the vinyl channel and a picture of the bottom of the shoe that is broken and also the top of the plastic channel track that the shoe runs up and down ... (cont.)

Hello Does the CARADCO FRICTION SHOE come in a steel/metal version or is plastic the only option? Thanks

Hello I have old non-tilt windows which are having a hard time staying up. I believe the issues is with the balancer. Can you help identify the needed part so I can replace them? Thanks you

Need replacement track glides and the slip that holds the top of the spring.

I am looking for this replacement clip for window balancers They are in a plastic channel. The windows are wood inside and vinyl outside, The windows may be from the mid 70s I have no further inforon the window

The springs are attached to the lower window by a plastic part which broke. Need to replace the springs and plastic parts and the metal attachment to the windowAre there install instructionsGlass interior measurement is 27 5/8exterior width 30 5/8exterior hieght 31 3/4peter

First picture shows pivot shoe side view and pivot shoe installed in vinyl jam. 2nd picture shoes pivot shoe top view and same pivot shoe in vinyl jam. The pivot shoe is 3 and 3/8 inches long, 1/2 inch deep and 7/16 inch wide.

I need shoes and balances

Thanks for your time, I need to see if you can identify the attached parts from the pictures I have attached! We are thinking they were sold in 2002/03 and purchased from M & W.Regards,Tim

I cannot find any make or model in these windows, but the plastic sash support which connects the sash to the spring is broken in most if not all of my windows. The house was built in about 2003, so they are about 15 years old. In the attached pictures, the plastic support on the right is broken, an ... (cont.)

Hello, I have double hung wood window. Plastic Piece (foot?) that connects window to sash balancer spring has broken. Looking for options/path to easiest repair. Photos of (intact) piece attached as well as vinyl jamb that sash balancer spring resides in. No idea on window manufacturer, but house ... (cont.)