Viewing all customer Discussions for:

15-129 Pivot Shoe, 9/16" Thick

We recently moved in this house and a couple of single pane sliding windows don't work due to broken/missing parts. I would appreciate your help in finding replacement parts or complete assembly or a substitute balance assembly kit.Thanks

Hi, I have double hung windows and this part broke on the other side of the window. Basically the string snapped out of the base. Do you have the base part? Thank you.

Is there a non-block and tackle and pivot replacement for this tilt out vinyl window marked "16B"?

This pivot shoe is from a PGT 2860 DH impact window. It measures 2" high 1.25" wide and 1/2" deep. There is no cut out in the channel so I would need to cut the vinyl track frame to remove the pivot shoe.

Hello, I have a broken balast and would like to get it replaced. it has a black plastic top that screws to the window jamb, below that is a spring that is attached to the black top piece and has a metal tube through its length, spring is 13.5", the bottom of the spring attaches to another plastic pi ... (cont.)

Need to identity this part. What tools and other related parts are needed?

Have a window with a broken balancer. Sash unit is approximately 25 years old, builder grade double sash where only the lower sash moves..Existing balancer appears to be block and tackle design, but is in pieces...Overall sash unit is 58 inches (inside dimension); movable sash is 29 3/8 in. High, 37 ... (cont.)

Hi, I had a window made by united window. the model is about 20 years ago. the window can not hold up. I noticed the balance shoe was broken which the string is not disconnect from it. also the pivot bar is broken. Could you please advice the correct parts number for balance show, pivot bar, string ... (cont.)

Hello I'm looking for replacement shoes and balances for year 2000 Napco tilt windows with spiral balances

Hey, I have this ballance that is about 23 years old. The double hung windows open inward and can pop out. They dont stay open so I assume I need to replace it. The rope in the picture is what connects to the bottom of the window. What replacement parts should I get as I can't find these anywhere. T ... (cont.)

I'm tryong to get part numbers for the following for an Sunrise/MI restoration window. Also are the pivot bars/pins supposed to be angled as in the picture? The Balance say 22C Thanks Ron

The pivots I bought from you are a slightly different. The new ones have tabs on them and my old ones don't. I'm thinking that maybe they did this so it would fit more windows. They won't work for me as is but If I was to shave off the tabs it looks like they would work perfect. Unless there is a ... (cont.)

Looking for a pivot lock shoe for double hung from Lockheed Window (in RI, no longer in business). I had purchased item 15-179 thinking it could possibly be adjusted to fit the track - no luck though, too narrow to try.

I need to replace 6 balances. This look like this. Which one do I need and what else?

I have what looks like to be broken block and tackle rods for a window. I am trying to figure out what parts I need to replace the broken part or what else I can do to have the window working again.

see the enclosed photos of my side mount pivot bar, I didn't see anything like this on your web site, do you have anything like this? Mine are bent, I'm assuming because the window is so heavy. We took out the window and it weighs 41 pounds. So please let me know how much it would cost for (6) S7 ... (cont.)

Looking for a window piece

Hi, I am looking for all parts for windows, I do not have any part number information; or manufacturer name, but I can send photos and videos if needed, I sent the only 5 pics allowed.

Hello. I need to replace two balances and pivot shoes. My window is 14lbs. I believe I need part number S770-22 B but my balance depth is 1/2 inch (5/8 seems to be more popular) and I want to confirm which balance and pivot before I purchase. Can you help? Thank you.

Hi, this double hung vinyl window was manufactured circa 2002. The manufacturer was Merrimack Valley. They are no longer in business. Several of these pivot shoes have broken cams. I did not see among your images one like it. The shoe slot measures 1/2" deep and 3/4" wide. Perhaps you sell on ... (cont.)