Viewing all customer Discussions for:

15-134 Pivot Lock Shoe, 3/8" Thick

You can see this is a busted tilt window shoe. My window has a spiral balance. I measured this 3/8" x 15/16". You can see that in this original shoe the metal teeth sit below plastic teeth. I don't see any identical models in your store. What will work?

I need help identifying this tilt latch. They are simply falling apart :/ I also need to replace the pivot shoes. I measure them 1.25" wide & 3/8" thick. The pivot circle is tan The windows are estimated 10 years old and we're in the house when we bought it?.. I don't know the brand of window. ... (cont.)

I need part number for Pivot Shoe, 1/2" thick, 15/16" wide. Similar to 15-046 but 15/16" wide, not 1 1/4" wide.

I have several windows that may have been made by Capital. They are approx. 15 to 18 years old and the double hung tilt window shoe requires replacement on a number of the windows. I hope you have a part number so I can order replacements from you. Thanks for your help - Fred Fink ... (cont.)

Inside the track of my window is a tube 30 inches long and 1/4 inch wide with a twisting rod inside (guide?) that appears to have broken off from the bottom. Is this replaceable and how do I disconnect the bottom piece? The top seems easy enough, just being a screw but the bottom seems like a leaver ... (cont.)

I have carefree windows from 1999. It appears my pivot stops have failed, prolly due to operator error. I can't get the spirals to stay attached to the pivot block. Are there replacement blocks I can get.

Hello.I'm having trouble finding replacement pivot shoes for the windows on the property I work at. The replacement shoes I find don't quite work. They fit the window channel and the spiral balance. The issue is the rotating part that holds the pivot arm on the window. I can't get it to turn, when i ... (cont.)

The window assist are broken, the lead keepers are busted out of holders that help lift window. One picture shows the lead keeper holding the rods which are connected to slide. Hoping you can help me out, thank you Don

These are better built tilt windows. The 15-211 cam is deeper than what I have. Please advise

Hi. Guys pls help me to select the right part. Thank you. This is completely different one that i have now and different size. I sent u pictures. Mine is like 15-134 or 15-212. Can pls try to match it. Here is the pictures.

I need help to Identify the correct glide shoe for my 29 inch spirals. Red tip, sash weighs about 12 pounds. 1 inch by 2 1/8 inch x ~5/16th thick. Pic attached. Thanks.

Hi guys, Well I ordered the 900 series balance system and pivot shoes Product Code: 15-134 swico. The problem now is, everything fits , except the cam hole, it's to small, the pivot bar is a little bit bigger so it won't fit in. So what are my options? New pivot bars? Or new pivot shoes?Best regards ... (cont.)

Good morning, Are you familiar with this window brand? I can't find parts by the name stamped on the sash lock. I need some sash locks and balance tubes for some of our windows

15-045, 15-134, 15-218 may fit or I can make them fit, but what are compatible Pivot bar that goes with them ? Old measurement is 3/8" thick, 1" width, flexible height (can work with 2"). Preferring side mount, alternatively which shoe can work with 26-402. Thanks,

25-year old home; many original windows of various sizes and configurations - 17 of which are all single, tilt-sash, lower openings - 12 of these, various sizes, are marked "Better Bilt" (BB). The other 5, have no manufacturer markings - possibly BB of a different early-1990's model, dubbed the "Unk ... (cont.)

My pivot shoe looks like your product code 15-946 except mine is 1" wide not 1 1/4" wide do you have one

A few windows at my parents' house are VERY difficult to move. As the first step in resolving this, I removed the lower sash from one window. I did this as I've done other windows, and as every online tutorial says to do it--I opened the window a bit, pushed the tilt latch releases so the sash til ... (cont.)

Please help identify the shoe for a spiral balance that is 29"

The measurements of this shoe is 3/8 x 1-7/8 x 15/16. And the pivot bar insert is 3/8. Would you carry anything that would work?

I'm currently trying to locate and purchase (4) new spiral rod balance locking shoes. My balance rods are 3/8"dia. x 29"L white tip. None of the local window companies in my county, Brevard, Cocoa, FL has any of the old type lock shoes or can locate any. I have attached pictures of one of the old s ... (cont.)