Viewing all customer Discussions for:

15-143 Coil Bushing

I have a Two windows that need all four coil balancers replaced. You have most of the individual parts, but one of them is discontinued. Wondering if there is a all-in-one or universal coil balancer that could fit my window. 6 pound one and a quarter inch wide

Looking for Coil Bance parts shown in photo due to broken spring (and worn parts).

Hello, below is all the data I have on the window. Its in a local cat shelter so I don't know how the RH pivot shoe got damaged. I know the anchor screws are missing from the spring coil units in the photos, those screws have been replaced and both units are working ok. Thank you. window sash: 15.5 ... (cont.)

spring has a # 7 on it

Looking for both sides of you could refer the part. Window weighs 10lbs

I have an Allianced window, picture included of the window identifier, not sure if one of those is a model#, but it is Alliance. I have included a picture of the pivot bar, since I might as well get some of these for future replacements. The real issue is the side window mechanism, picture of good ... (cont.)

model number 054-654098 window won't stay up spring broken on both sides double pane window tilt in

Looking to replace the entire mechanism. I was told the springs are as follows. S175BS and S175BL. I'm looking for a complete assembly if possible.

Looking for this part and the barrel and the sleeve the barrel rides on can’t find them . . It appears to be 8lbs is it the 15-177 ? Does it come complete? If not what are the 3 parts #'s. Thanks

I am looking for the part number to replace broken slide in my alside window. I think it might be 15-177? I don't think I need to replace the coil springs. see picture attached

Allows the window to glide within the tract

Looking for the correct parts for 1.balance assembly, 2.coil support 3.pivot shoe. 4.coil balance.

Coil is 1/2" wide with the letter "E" stamped on it. I need 2 coils and 2 covers. The window weighs 11.1 lbs. Can I use the existing boot or do I need to replace that too?

Hello, I’m hoping you can help us identify and order the correct replacement parts for several of our windows. We have about five windows where the blue shoe brackets have snapped. The part number on the blue component appears to be 5.704.165. Each side of the affected windows seems to have ... (cont.)

Hi. We really just need the bushing for this part, but would like them in heavy plastic/not white metal. 1 1/4 x 5/8 x 1 3/8, but add 1/32 to each measurement. These were soft lite windows. Thank you. Bob Need 30 of them.

Pls check to see which parts are required. I see the #8 on the spring. Hopefully, the measurements help. Pls let know is I must change out the screws or covers whatever that might be.

Please use the attached photos to identify SWISCO replacements for the following.Coil Balance 1/2"WCoil Balance ShoeCoil BushingCoil Balance CapPivot Bar 3-1/16", 2 Hole (1"c-c)T-Slot Foam Filled WeathersealFYI: ViWinTech windows manufactured in 2001 (see attached Lower Sash Label ^Missing Frame La ... (cont.)

It has the letter d in the center

Need replacement pivot bars and shoes

Pivot shoe and coil#10. Cannot get right shoe to rotate enough to release from sash. Any suggestions?