Viewing all customer Discussions for:

58-004 Gray Pile Weatherstrip, 9/32" x 1/8"

The weather stripping slides into the slot on plastic piece. Picture shows side with weather stripping top of door is with out.cant find right size. Plastic piece of weather stripping that slides into holderis either 9/32 or 5/16 I think. Fuzzy part is like 2 pieces with plastic in between. Are the ... (cont.)

Hello, I've messaged you before regarding some of these parts, but I'm still looking and have some more info. The first pictures are a channel piece we had trouble identifying. I recently noticed that they have the number 0132 moulded inside. I found a local supplier but he was charging more than ... (cont.)

Hello, I'm looking to replace my weather seals. They look like they measure at 1/4 inch wide across the base. I was thinking 3/16 would work.

I see several sizes of Gray Pile weather stripping on your site (58-XXX). Can you tell me which one matches the Crossly Series 2500 sliding glass doors? The Rolling Bottom Rail is Part Number SDE-5283 apparently. The roller wheels are catching on the brushes because the weather strip ends are wor ... (cont.)

9/32" wide by 1/8" tall (maybe 5/16" since the pile might be compressed). The backing is like a fabric material not like a solid piece of plastic and moves easily in the track. I see a few parts that might match. 58-099 or 58-004. 58-099 maybe more appropriate match because of the fabric like ba ... (cont.)

I cannot find a brand name anywhere on this door but I believe it to be 40 years old. The hinge says Ideal HW. I believe I need grey 9/32" X 1/8" wool pile.

Hello. My windows are over 25 years old. I don't know the manufacturer. The weatherstripping could not have been very high even when new. I suspect that 1/8" deep might be too much. Am I stuck?

I've got 13 sets of doors that need new wheels. I'm directly on the gulf so I prefer all stainless steel if possible. This one is from one of my narrow doors, I'll pull a wide door next to ensure they are the same wheel sets. Obviously, it's a D-1002 (Nu-Air?) (Photo 1) Top Rail weatherstripping ... (cont.)

I need a Medium Density Window Pile with the t = .187 and the pile .1 inch high Thanks Tom

I have an aluminum frame door that is missing the pile weather stripping. It looks to me that I can slide a new strip in the channel. It is a 1/4 wide but the inside is maybe an 1/8 bigger on either side. It probably needs to be 1/8 tall

I need several of the pieces attached to the window frame that holds the channel balance down next to sash. I think first pic is of sash without that piece and next pic is one with the piece. Without that piece the CB stays at top of frame. I also need several take out clips -the old plastic ones-Ho ... (cont.)

I am trying to replace the channel "fuzzy" weatherstrip that is 1/4 inch back and 0.160 inch "fuzzy". The sku number on the package my neighbor has is sku 049793878274 and the number P7827 was also on the package. He did not remember where it was from and no name was on the package. I need 50 f ... (cont.)

As you can see from the picture, my fuzzy pile is no longer very fuzzy. :-( The attached pictures are of the aluminum frame of my 1968 VW camper. I need to replace the pile so the windows a) stop rattling, and b) stop leaking. Both important, be b is the greater need. If you look end on to ... (cont.)

Good morning, I have what appears to be a Kawneer aluminum windows. They have a gray EPDM extrusion for a weather strip. I have attached a simple drawing of slot and extrusion dimensions. The closest part I can find on your site is your 58-004 wool pile. The material does not have to be exactl ... (cont.)

HI, My Crossly slider is of 1978 vintage. It needs rollers and w-stripping, felt, etc. The frame and door are adequate and attractive despite the lack of argon between panes My questions: 1. Would the model name or number be helpful in selecting the correct rollers? If so, where would that ap ... (cont.)

Hi, I'm hoping you can help me locate something on your website - if it is indeed available. I'm working with vertical sliding windows that I'm using your 28" / 380 series channel balances. What I am actually looking for is a sort of felt like material that fits into a groove on the back of the wi ... (cont.)

Bought a roll of 9/32 x 1/8 (58-004). To wide and I can't tell which depth makes tight fit with 1/8 to skimpy. I see to possibile choices..58-158 or 58-050. Any Advice

I have several vinyl clad sliders at my second home in Avon NC. One of them is missing the the "wood pile" weatherstipping at the bottom of the slider. It seals the bottom slider from weather when the door is closed. The channel it sits in measures 9/32 inches. Not sure about the depth maybe 3/32 i ... (cont.)

1. Does the 82-009A come with an outside pull similiar to 82-042? It's hard to tell by the picture. I can't use anything other than 82-042 because it would be flush with the jam. 2. Is it possible to replace the gray pile 58-004 without sliding it out/in the end of the track. It looks like it w ... (cont.)

I recently purchased your sliding window rollers #87-162 and felt weather stipping # 58002. I chose that size felt stripping only because the the bottom of the roller page suggested to use that item number felt stipping. Since this is my 35 year old rental house, I was not able to get the exact dime ... (cont.)