Viewing all customer Discussions for:

15-148 Bumper

Hi, I'm trying to find the best match on your website. The window is about 16-17 pounds. on the spring it says. #4.5 33" PAT5232208. See attached photos for reference. Thanks, Zack

I need help with replacement hardware for this type of window.enclosed is bar code of window and hardware i removed. This is for 2 windows . Each window measures 33. 3/8 inches x 23inches. If I guess the weight of the one window each 20 to 25 pds. . Thank you.

We are looking for replacement parts for some windows for a Customer. I am unfamiliar with these, but upon research it looks like the parts you have listed, could help us out. We are currently looking for pricing. And unsure of quantity at this time. I am not seeing any numbers or markings on ex ... (cont.)

Hi there, I have a window that won't stay open because the coils have snapped. It has 3 coils per side on each window. The markings on the coil show 33" P # 3.5 5232208 on it. The cover at the top has markings patent #s 5.232.208 - 5.365.638 - 6.584.644 B2 FAS # 10246Can you help me with the parts I ... (cont.)

1st picture-shows window label 2nd pic-pivot shoe or lock (not sure the correct terminology) Also need the coil springs that run from center sash side to bottom dash side. Need internal tilt latches R & L

The coil spring is 0.5" wide and is stamped with #3.5 35" The pivot shoe is 0.5" thick Looks like one bumper is missing, should I replace it with two new ones? Do I need any other parts?

Hello, I see that I have simonton windows from ~1995 (guessing) when the house was built. I have a few where it seems the coil on the sides of the windows has broke - making it so the windows won't stay open or are very hard to open and make a lot of noise. Attached are photos of one side that I ... (cont.)

No numbers

Coil spring is broke or came loose. Any help..

hello, the only numbers I could find on the coil balancer is0m137 on image on window part #34.610.108 on the 2 coil covers on image part #2Thank You, Todd

I need to order balancers for several windows that have broken. Simonton 1994 windows.

Hello, Trying to find the right replacement parts for 2 coil balances for a bathroom window. The broken parts can be seen in the pictures - the steel coil has a "3" stamp on it. I could probably reuse the pieces that hold the pivot bar, but I would definitely need new coils and new coil housing part ... (cont.)

Would like complete assemblies if available. Otherwise,I need two coil balance springs. Only numbers I can see in the plastic is a patent # 4.610.108. Also a number on the coil is 6 or a 9? Window sash is 22.5"x 22.5"x 1.5" thick. Window channel is 1.25" wide.

It looks like a doubble coil. I need both parts. The one that's screwed down and the part that slides for both sides of the double hung window

The lighter plastic part is labeled as OM137 patent pending. The lower part is labeled 4.610.108. Thank you!

Both sides bottom window of double hung window. Coil Balance spring snapped. Removed one side and the only number I could see is " 7.5 " on spring. The rest was unreadable. I am sending a pic of unit I took off. I will call again on Monday. The closest i could find on your website is " S160 "Raul ... (cont.)

Good Morning! Attached are some pictures of the parts that were removed from a window at one of our properties. Can you help identify the replacement parts for this? Thanks Jamie

I have a tilt single-hung window with V-grooved IG units. The Sash weighs 29 1/2 pounds. It has an unusual triple-balance assembly with three individual coil supports connecting to the the T-bar tilt shoe. Only the bottom coil spring has a number 9 on it and the sash weighs 29 1/2 pounds. If I order ... (cont.)

I am looking for everything I need to replace the coil balance system on my double hung vinyl windows. I cannot determine the maker but they are approx 27 years old. On the Coil it reads: OMEGA #3, 5 33" The privot shoe is 1/2" thick and approx 3-1/16" wide. The Coil carrier is 3-1/4" Long and 1-1 ... (cont.)

I sent a prior request . This a follow up.I need a pivot that is broken . It's channel shape w 2 holes and two slots and is 3" long. I sent 2 photos one of a good piece and one of broken one. I'll replace both since one is warped.The sash weighs 9 lbs.I also need a balancer coil that broke. It says ... (cont.)