Viewing all customer Discussions for:

15-157 CertainTeed Balance Drum

Need two of these coil balances , can you tell me the parts I need to order

Need balances for both sides of upper and lower windows. Spring is marked 406. Also need the brackets that attached to the lower window that fit into the cams. There is still a part on the springs but the cams and the other plastic piece that fits around the cams have all fallen down the window tra ... (cont.)

Images are from a good window of similar size. The Certainteed pivot shoe broke off the spring in the track. I have sash in place by only the lock. I need assistance identify the correct part(s) to order. These windows were installed in Spring 2000.

Number on spring 4075

Hello, Window would not close all the way and found these parts in the side rails. What do I need and how do I replace these parts? Also the plastic lock piece came apart. Super glue it? Please help

Hi there,I need to have these parts replaced on my windows. This photo is taken from a 3 panel living room window. It's the middle pane (largest) that has the broken pieces. Where can I purchase the items?Thank YouTammy

Hi, hoping you can help... This is broken but as best I can measure it is 2.5 inches x 1 9/16 on the coil side. Its from a Simonton 6500 dh 30/50 window 2004.

I am in need of some replacement balances for our Simonton windows for our condo in Gulf Shores AL

I would like to ID and purchase a part for these. Each side has a lifting spring that connects to the tilt lock part. It lifts and locks when titled. I also need the latch shown in picture two. I need left and right lift and lock parts and left and right tilt latches. Please let me know if you ... (cont.)

Got several windows with this broken pivot, can you identify, so I can buy the correct part.

Simonton window parts needed

My windows had been installed in 2005, photo of the label attached. Do you have a fitting part? See pictures. With Sears I had no luck. Thank you for your help Frank

HelloI need parts for my Simonton final windows.For double hung window I need 2 sets (left and right) coil box and pivot shoe.Both upper and lower window pivot shoe on both sides has broken. The coil box and coil are ok but I think I have to replace both.Do you have these parts?N Kobie ... (cont.)

Please see photos. I need pivot shoe holder - it's rather big (almost 1 in in diameter) and a thing that holds spiral in place in the middle of the window

We are trying to identify the proper springs for replacement in Certainteed tilt windows circa 2000. The sash weight is approximately 20 lbs and the original springs have the number 10 stamped on them. Please get back to us with any information you have. Thank you,Jim

Measurements for the piece are:1 1/4 inch across the top4 1/8 inch in height7/8 inch thicknessI need to order two (2) of these for 2 windows.

Hi, I'm in need of some Certainteed replacement window shoes. Also any videos or instructions on how to replace. Many thanks!

The window slams shut does not stay up. Need to order part to keep it up.

Hi I have a customer who needs this part replaced. I was wondering if parts like these came in a set or some sort of bundle because I would need brand new pivot shoe (product code 15-192), the coil spring (product code S170-336), the balance drum (product code 15-157), and the lance spring cover (pr ... (cont.)

Do you have these replacement parts for a double hung window?