Viewing all customer Discussions for:

16-002 Take Out Clip

I have 35-yr-old single pane windows with metal (aluminum?) frames. I'd like to replace the pile which is missing entirely, disintegrating, filthy or just not sealing well. The existing pile measures with a 1/4" wide tab and 1/8" deep pile. (see the first three photos). Some of the windows ar ... (cont.)

Hi, I need to identify the channel balances from the attached photos. The length is 26 7/8 inches.Please let me know the item number and price. I need two. Thanks

Looking for four [4] side load balances. they actually measure 30" long from tip to tip, including plastic, 29" not including plastic. Please include {4} take out clips 16-002

Hi, Your website is great - pictures and videos are really helpful! Half of the windows in my 30 year old house have at least one busted window track. I'm attempting to repair one window and if successful will do the others. Starting with replacing channel balance in 35w x 19h kitchen ... (cont.)

We would like to replace channel balances (stamped 2420X) for 4 windows (i.e., 8 balances). The balances are 25" long, and thus it appears to me to be Series 350 with 15-002 bottoms. The tops appear to be #19-004 or 19-031. Also, I need one take out clip #16-002. Attached are photos of the ... (cont.)

Could you help me find the replacement part for my window balance. I have a double hung window, non-tilt, 1/2" channel width, the length of the metal portion is 34 inches, and the photos show the ends.

Hello, I purchased a home twelve years ago from Standard Pacific. The windows in the home are Pacific Windows. I have a window that's arched on top. The window is 38" wide and 64" high. The bottom window is 29 1/2" high. The top window is solid and cannot move up and down. The right channel ... (cont.)

I live in a 500 unit condo complex and I am a repair contractor. We have new windows installed few years ago with different balance systems. Many are falling apart in large numbers. The windows are 25lb, and the length of the ballance's metal part is 26". The windows are very hard to close, so they ... (cont.)

I have a window that will not open and the sash balancer is outside the window frame. All of the videos show to push the balancer back down but it will not allow the window to open. Can you please help?

Hi, I have replaced a few take-out clips but find it very difficult to remove the old ones. The new ones pop right in easily. Can you give me any tips or is there a special tool that helps remove the old take-out clips? Thank you

34 w x 36 h edge to edge of metal frame for removable bottom, double pane, single hung window first two photos are bottom guide

I am a returning customer needing to buy two replacement channel balances for a Jordan non-tilt window in my home. The window sash measures 30 1/4" H x 28 7/16" W and weighs 20lbs. 14.5ozs. The numbers stamped on the side of the old balance are 28-3 and K 1. I think this is a series 390 bal ... (cont.)

I have Jordan windows similar to those shown on your u-tube video, except my windows do not have any take out clips. What is the procedure when there are no take out clips?

I am looking to repair two broken channel balances. The stamp on each reads, "30 3 DK Caldwell". Can you confirm if product code, "S380-31" 3030 is correct replacement part? If so, can you advise on what are correct clips that work with them? Any suggestion greatly appreciated. Vr Michae ... (cont.)

I want to replace some window balances, they have a stamp "14 2 HR CALDWELL". The length of the channel measure 15". but is about 1" too short, they don't reach the locking tabs. I'm figuring I need the 385 series 16". channels with the 1520 option. Does that sound about right?

Swisco my friends i build windows and doors. i would like to use your balances in my widows. im looking for hardware that can be used to make these hidden balances to work with my new windows, but also to retro fit old stuff like the clips to remove the sash and reinstall to work with old and ... (cont.)

Hello, I need to replace 6 of my balancers and also need a few take-out clips. I've included pictures of the numbers on the balancer and inside the window itself.

Need assistance identifying the right replacement part for the attached balance. Need a pair of new ones.

Hi, I think I've identified our balance as your series 385 channel balance. The metal part is 34". It looks like it has the 19005 top and 15004 shoe. The number stamped is 33 4 CN CALDWELL. Would this correspond to the 3340 stamp option?

Hello I recently moved into a house with a single hung window with both channel balances missing. I have removed the sash and it measures 34" x 35" with the visible window pane to be 30.75" x 31.5". I don't see any label that indicates the manufacturer of the window. With the variety of channe ... (cont.)