Viewing all customer Discussions for:

16-002 Take Out Clip

How do I replace a broken take- out clip ? The clip has lost its tension and will not stay open.

I am searching for Traco TR-5000 balance shoe, sash plunger, sash plunger hook and sash plunger springs. Do you happen to have any of these in stock? What would the prices be on each if you do have them?

can you help me for identifying my parts for replacement

Hi, Just need to confirm which replacement balances to order. I've attached photos of my existing balance. Measured length is 28" metal-metal. Not sure which model best matches my plastic ends. I need two balances and 10 take out clips - item 16-002. Thanks, Paul

Looking to purchase two channel balance. The stamp numbers 34 4 IU CMC 2. The lenght is 35 inches. The two photos show the end pieces of the channel balance unsure which model to order. Would also like to order two clips. Please me email me the correct part numbers for the channel balance and clips. ... (cont.)

Have a non-tilt 1970s window that had broken channel balances. Would like some help identifying proper replacements. There were no take out clips on the window, and no empty slots that we could see where they should have been. The window was stuck in a crooked position so I'm sure we damaged th ... (cont.)

We have purchased parts from your company, and just don't see this exact part so want to send a broken one to see if you think you have replacements. We would need 12.

I have different size balances that I need to replace. I think I need Series 377 Channel Balances for all but I am not sure of the proper weight code. In the supplied pictures you can see the code of 23 - 1 J would this be a 2310 sash weight? Thanks for your assistance, John

I have a single hung, non-tilt window with one of two channel balances that has broken. The broken channel balance has the marking "27DS B.S.I. BM 33". The matching channel balance (still functioning) has the marking "2740 EH B.S.I". It is a nominal 28" length channel with just over a half inch w ... (cont.)

Need to replace both channel balances on 34"w by 36"l Kinco windows. Unsure of actual length because bottom rusted away. Measures 34.5" into rusted area. Markings on side of balance say 34 2 K T CMC. Would this be a 34" or 35" Balance? Believe this is 350 series from your photos & .5" wide. It app ... (cont.)

I have a 28" channel balance from an old SunAir window. . It is stamped 2720F. What would I purchase to replace this? Also all of the windows we have of this type don't have take out clips,but the frames have a space for them. Should we order them as well? Thanks!

Pleas let me know what you think. I will need two. Also this window frame DOES NOT have side clips so I'm not sure how re-install these balances. Any ideas?

We have a Linder window that won't stay up. It appears that there aren't any "rails" that would guide the window up and down / hold it in place. Basically the window is just kind of sitting loose in the frame. (We have NO idea how this happened, but we think it must've been like this when we boug ... (cont.)

This is for a 1995 Viking non tilt window, I need 4. is this sufficient to identify the needed part?

I have two Caldwell channel balances that I need to replace. They are 30 inches long and have 29 3 EQ CALDWELL stamped on them. They are 1/2" by 9/16"s I am enclosing pics, I hope that you can help me. Also, I will need two of the take out clips (16-002) as they seem to be missing from the sash. ... (cont.)

I need a 1/2" wide channel balance, 28 inches long for a non-tilt Atrium window. I need the shoe and top attached. I think the part I need is a Product Code: S380-28. Do you think that is correct? I also need a take out clip and a top sash guide and don't know what parts to get for the ones picture ... (cont.)

Hi- I need to replace two single hung window balancers. My windows have no markings but the balancer has the number 2830 on it- its in the pic called "IMG_3336". I suspect they are acorn or some other brand that is no longer in business. Help! Thanks!

I have a question about this balance. I'm working on a Empire Pacific single-hung vinyl window in which both the balances terminal plastic parts are broken, top and bottom. I was able to remove one of the balances, but the other has snapped two stops in half rather than release from the window sash. ... (cont.)

I have non-tilt sliding windows with 27" channel balances (I think). They have been non-operational since I purchased my house and I dont have any knowledge of the make/model other than "IWC" logo on the latch. I tried to re-attach the balances, but they won't stay attached. It feels like the spr ... (cont.)

the ones i have are 18-166 and 16-002. i also have the rivets and the rivet tool. the piece i need now goes on the bottom of the window on the metal piece.