Viewing all customer Discussions for:

16-023 Pan Am Take Out Clip

Good morning I need to replace the channel balance for a number of windows. I already purchased from you the top Shash guide that fit perfectly. The manufacture identified as PAN AM. They differ in length but they are all the same width Further reference in addition to the photos attached. I n ... (cont.)

Chanel size .58 and Ft/Bk .63 inch. Need 24in #2320 qty6+ 25in #2420, qty 8+ 18 3/8in #1820 qty 4+ 23 15/16in #2310 qty 2+ also need On glass window frame. stops for channel Balance 2+ left.. 2+ Right.. Kinda of L shape with reinforcement. I need to send pic. and Stops for channel balance ... (cont.)

I've attached pictures of the clips in the frame & the top pieces installed on the window

Hi, I was told that I need these three items along with a 2320 balancer, I want to be sure to get the right parts to rebuild 5 complete windows. Thank you for your help and for info I am a disabled veteran working on my daughter's windows. Thank you again in advance, john

Uriel

I have 2 types of windows 26" and 30".I need to replace the balances, sash & plastic take out clip. I don't know the window brand. all I see is "AAMA Sponsored" see picture attached. The balances reference are 2320P for the 26" window and 3010P for the 30" window. Thanks a lot for your support. Jai ... (cont.)

I need 8 channel Balances with hardware and 8 Take out clips.Channel Balances have only one number on them and that is 1840. They measure 18 1/2" long, as shown in the photos.The take Out clips fit the Measurements of your Pan Am clips. See them also in photos.Thanks,Herb

Hi, It seems that the plastic pieces holding my windows that are 30+ years old are all breaking. I have taken out the channels balances out and they seem OK, but on windows having issue its all the plastic that is broken. Based on the pics, I have provided, is it possible to just get the plastic ... (cont.)

I am needing the cap on the window (pic 1) that holds the 377, 1820Q slide in and the plastic strip (pic 2) that holds the same slide in place to take out the window.

Hello. My custom channel balances have arrived, thank you, but no clips...I had mentioned it in the communication but I didn't see clips specified on the order and I do need those as well. I am attaching a picture of the clips we removed; I did not see anything that looked exactly like these in yo ... (cont.)

Hello! My channel balances just removed from a faulty window are 18.5 inches metal end to metal end. Including the plastic at each end...19 inches. The imprint on the channel balance reads 18-2 J. These are original from 1988 when the home was built. Not sure which replacement size to go with.. ... (cont.)

I need (2) 31 inch balancer stamped 3030 with the ends per photo along with (2) of the clips that screw the window. The balances measure 5/8 one side 9/16 the other without a rolled edge.Call me if you have questionsThanks

Single hungle side-load block and tackle window with a plastic take out clip.

Help me identify which chanel balances items and any accessories I may need. Jack

Hello, I was able to use your guides to identify the new clips and balances I needed but when I was installing them I realized I need to replace the top sash guides too. I'm having trouble identifying the correct part. I attached a picture of my recent order if that helps identify a corresponding t ... (cont.)

Non-tilt window only markings on the channel balance are 2320 width 1/2" approx 25" long Home was built in 1981

Series PA-14 MST: 3965 4776 Several windows don't stay in the "up position" . The piece pictured is a working window. The ones that don't don't have this piece. Built approximately 1984.

The bottom sash of our Philips Window dropped years ago and I want to fix it. Is there any way to get it back on track? I have no other pieces.

How to replace plastic 16-023 take out clip.... Clips in our windows are very brittle.. break easily... Can't seem to get new clips in?

2 years ago i ordered this balancer - i used old broken balancer part number and i change both balancer for most of the windows now balancers (2) of one window is broken and all windows opens hardly i thought it is possible that old part number is wrong i wrote the window size to hear your suggestio ... (cont.)