Viewing all customer Discussions for:

82-218 Mortise Lock, Round Face, 3-11/16"

I have a problem with the internal mechanism on my patio door. The internal spring has broken and causes the latch to fail. Can an entire set including the internal works and handle be replaced. I

I need the lock mechanism also since it's also broken. I attached the picture here again which I attached last time when I order Latch Lever Kit. I need order 2 pieces o it.

help

I cannot find the name on the sliding glass door I looked at both of the ones I have and neither one appears to be marked. The latch will no longer work it doesn

I had my door broken and I would like a replacement. The handle has Canadian patent number 919213. The handle is 7 & 3/16 long x 1 & 7/8 wide. The holes are 3 & 15/16 centers. Thank you

My DNS sliding door lock mechanism is broken. I am looking for the replacing part as shown in the picture. I need 2 of it because my 2 doors have the same problem.

I need to replace the handles and locking mechanism on a sliding glass door that is about a 1977 vintage. I have attached pictures for your viewing to match me to a new set of handles and lock. Thank you in advance for your assistance.

Hi, I was told to measure the screw hole distance and to upload some pics of the handle and door lock area ,looks to be 3 11/16 from screw center to center.

I spoke with you a couple of weeks ago about my order for the 82-218 mortise on my patio door. I am enclosing two pictures that, I think, show what the problem is. Basically, the mortise seems to be working correctly but the latch lever does not have enough room to go down. When held straigh ... (cont.)

Hello: My door won't latch. The hook-like thing that goes up and down appears to be broken. I want to replace it, or the entire hardware set if necessary. Writing inside the handles says 2265, Taiwan, U.S. Patent 5125703, D340,398, SASH CONTROLS, FERNDALE MI. Please let me know if you have ... (cont.)

I am sending this to see if this part can be replaced on a wood sliding door. The only markings on it is "DN" The person that is requesting this info is a contractor. I am just sending the picture and request for information.

Original latch on sliding door will no longer stay in locked position. Need a replacement. Please help.

The 2 point mortise lock on our door needs to be replaced. We've had this door for 3 years, and with the part the repair guys keep getting us from Lowe's this will be the 4th replacement. The screws on the handle are 4" apart, the screws on the faceplate are 11" apart (keeping the lock on the door), ... (cont.)

Hello expoerts! Need help identifying this part. From a "typical" sliding glass patio door. --Thanks!

The mortise lock in my patio door is no longer usable. It fell into the door. I have ordered and purchased a few different locks and all of them were too large. The last model ordered was the 82-218. The screw holes lined up but the body was too wide and the length was too long. The body of the lock ... (cont.)

Hello Please find the attached file. Please suggest me that which mortise lock I need which fit perfectly in to my sliding glass door based on the dimensions. Thanks Rajesh Sash Controls Ferndale MI 2260 Taiwan U.S. Patent 5125703 D340398

Purchased item #82-218 to replace patio lock. The installation holes for this part and the door line up correctly, however the lock will not fit in the opening. The width of the lock will squeeze into the opening, but it

Mortise Lock with numbers 0399 etched into side. Made in USA.

Missing handle... need replacement part.

Need mortise lock for a Champion 6000 series sliding glass door