Viewing all customer Discussions for:

82-218 Mortise Lock, Round Face, 3-11/16"

I think this is a Kolbe & Kolbe. See the attached image from the number on the side of the door. Need replacement lock as the lever no longer moves the lock mechanim. Thanks. ps my son's patio door - I can get measurements if required K/K 0803990TVMC4610N

Hello. I need a replacement handle and internal working mechanism for this old sliding glass door. I found your website by entering a number I found on the plastic handle part (Canadian patent #919213, patent date 1975, and US patent 3596954) which took me to your 82-211 This part looks very ... (cont.)

Hello Swisco, I have a Silverline 5500 sliding door unit. I need to replace the handle/lockset (inside and outside handles, mortise lock and locking lever). What part no(s) do I need for replacement full unit? The outside handle is vinyl and inside handle is wood. Do you know if Curtis Lumber in B ... (cont.)

Hello: need to replace lock and handles on this door. Do you have replacement parts? Please notice that the lock is deep in the door mortise. Not sure if this will be a problem when trying to replace. Thanks Pablo

the spring insade is brok

Hi there, Attached please find the picture of the patio door lock and handle. The latch is broken. The lock is now inside the frame when I unscrewed it. Please help!!!! Best, Lesley

Hey guys I want to make sure I order the right latch and lever for my door. There is no name on door. Please reply to my request on the right parts. I think it is latch # 82-218 and Lever # 82-106. Thank you, Dave G.

2 padip door locks failed need replaced. Do you have ?m

Is this picture equivalent to your Mortise Lock, 4-5/8" Product Code: 82-226 Steven

Looking for 1 Replacement latch for vinyl Patio Door, 421-4001 VC 6068 IG, these are the model numbers off the receipt if that helps. Thanks Much, Tom

What is the significance of the degrees in the key way (45 vs 90)? I'm pretty sure which mortise lock style I should order but the key way degree difference is confusing me. I dropped the broken mortise lock down into the patio doorframe while trying to remove it so I don't have the original lock f ... (cont.)

Recently purchased an 82-218: Mortise Lock, Round Face, 3-11/16" as a replacement for a sliding patio door that had a worn lock. Installation went incredibly smoothly following the instructions provided in the excellent videos provided on the Swisco website. The lock I removed "looks" almost ... (cont.)

I have a used Pella door, It is wood interior, aluminum outside, opens from left to right standing outside the house. Is a Impervia 809R2109 door handle what I need? Thanks for your help Ivanna

We are missing the latch/hook and lever that moves the latch/hook up and down on our sliding glass door. So we can't lock it. (We've been using a thick stick in the tracks to lock it). My husband ordered Patio Door Handle Set, 3-15/16" Product Code: 82-035. This is the exact door handle we have. ... (cont.)

Thanks for the hardware looks like it will work but before ordering I would like to know how you take the lock out and then install. i am sure there is a way without to much trouble. Does it slid out the bottom/top? Thank you John

Vinyl SGD 1 1/2" door thickness, The locking latch is a blade rather then square.

We think to be an Old kk (Kolbe) Viewport sliding patio Door (1988). We measured the latch assembly to be .75" W x 4.375" H x 1.19" Deep. Screw hole Centerline is 3.5". The "L" is .75" to 1.0" depending where you measure. The centerline of the mortise is 3/4" from the inside door surface. W ... (cont.)

My rear door is a slider to the deck and the latch for the lock is missing. No names on the Door. The latch is 4"x5/8". The door is 1 5/8" wide. The latch from the slider only comes out of the door a small distance. The latch must fit within the opening in the slider part of the door to be able t ... (cont.)

How do I get the Mortise 82-218 out of my sliding glass door in order to put the new one in that I just received from you.

Hello, I could use help on finding and installing a broken latch on this older door. It looks as though the mortise lock is recessed enough within the vinyl trim it may be difficult to get out. Can you help? Thanks!