Viewing all customer Discussions for:

82-226 Mortise Lock, 4-5/8"

hello, need replacement lock for this patio door screws holding lock assm to end of door are 4 5/8" apart please let me know if more info is needed... thanks Greg j

I have a Philips Products Series 870 Sliding Glass Door. The internal lock is broken. Would you have a replacement lock?The distance between the installation screw holes is 3 5/8 inches.

From this picture are you able to tell what I need to replace this defective lock? Thank you, John

I think this is a Kolbe & Kolbe. See the attached image from the number on the side of the door. Need replacement lock as the lever no longer moves the lock mechanim. Thanks. ps my son's patio door - I can get measurements if required K/K 0803990TVMC4610N

Do you have an installation instruction sheet for a MW 82-226 : Mortise Lock, 4-5/8".

I moved into another home & the patio door lock is broken. What is broken is the small spring that operates the hook latch to secure the door.The sticker on the door has the following information: MFG Code PHP-28 Series 870 SGD and below that is SGD-R20 96x96I cannot find out any informatio ... (cont.)

I am sending you pictures and dimensions of the lock. Thank you for your help. Bill P.S. There is a picture of the broken thumb latch that is really the only part I need. LOCKING FOR SLIDING DOOR LOCK FOR A REPLACEMENT.

This latch is part of a Hayfield sliding glass patio door. There's no model or part number on it so I tried to take pictures with measurements. Hopefully, you'll have something that works. I would like a new handle to go along with it if possible. Thanks

Is this picture equivalent to your Mortise Lock, 4-5/8" Product Code: 82-226 Steven

We are missing the latch/hook and lever that moves the latch/hook up and down on our sliding glass door. So we can't lock it. (We've been using a thick stick in the tracks to lock it). My husband ordered Patio Door Handle Set, 3-15/16" Product Code: 82-035. This is the exact door handle we have. ... (cont.)

Hello, I've attached 5 jpg files of my current "Mortise Lock" - two are of the lock in the door, and three are of the lock removed. WRT names, numbers or makrings found on my hardware: "made in the USA" "0399" < I didn't not attached the photo which has this marking - I can always send it ov ... (cont.)

My rear door is a slider to the deck and the latch for the lock is missing. No names on the Door. The latch is 4"x5/8". The door is 1 5/8" wide. The latch from the slider only comes out of the door a small distance. The latch must fit within the opening in the slider part of the door to be able t ... (cont.)

I recently bought a part from you guys it was a turning lever, part # 82-106 I thought that would solve the problem because that was missing. I put that part on and it fit except the hook on the inside won't come out when you turn the lever, I'm assuming there is something missing internally. th ... (cont.)

This is a photo of my door. The broken piece is obvious. Mid-screw to mid-screw is 4". Can I replace only the broken piece, or do I need to buy both the in and out handles? Also, which part should I get? Thanks!

I have a glass sliding door that I would like to put an exterior lock on. Key lock on the outside, turn knob on the inside. The door is a Caradco brand door, part number cpdu1-60x68b. Caradco was bought out by Jeld-wen. I will have pictures to post a little later today. Any help would be apprecia ... (cont.)

Thanks for posting! As you can see in the Related Item(s) category on the 82-035's product page, there are a few options for mortise locks. Take a look at our 82-214, 82-218, and finally our 82-226, and then compare these to your existing mortise lock. Do any of these match your current hardware? Le ... (cont.)

Hi, I have a problem with a thumb turn on a sliding patio door and am wondering if I can fix this myself, and how to go about doing so. The problem is that the thumb turn (interior, lever type, with keyed lock on the exterior) is loose or jiggly, and does not properly engage the hook on the mortise ... (cont.)

We are looking for these replacements for a customer. THe lock measures 4" between screws top to bottom. 3 3/4 midpoint. We need the handle, the lock and the latch on the door side.

I am looking for a replacement lock for a Kolbe & Kolbe sliding patio door. It is the insert piece that is on the sliding door itself. The spring that move the locking mechanism is broken and I would like the replace this piece. Is this some that you your company stocks? Thank you for your respo ... (cont.)

Hi, I need help to buy a new sliding glass door handle. The outer unit is broken, don't know if I need whole assembly or just door. The slider is PGT. Screw distance is almost 4 inches. See photos. Thanks