Viewing all customer Discussions for:

18-009 5/8" Top Sash Guide

Please help me find something that will work with channel balance is S385-25. "385 channel balance", This is the original top. Thank you

I need to replace these shash which I bought for: (12) S385-33 : 33" Series 385 Channel Balance (4) S385-27 : 27" Series 385 Channel Balance Please advise. Thanks.

I'd like to purchase 4 (four) Top sash Channel Balance Guides. Please see attached photos. Dimensions are 5/8" wide x 1 1/2" long. These are from Millguard windows. I recently purchased two replacement channel Balances - see order # - Your SWISCO.com order #1436220 has shipped. After changing ou ... (cont.)

Good afternoon, I need help identifying this part. Thanks

Yes the 18-009 worked great. I just had to hacksaw and file the "flanges" that were in the way.

Hi...Looking for sash cams..There were no marking, names or numbers I could find. Have attached photos of existing cam.Thank you for your helpJohn

I recently bought some Series 350 Channel balances from you (28" option 2740) for a Milgard window. When I took out the window to install the channel balances some plastic parts (broken) fell out of the guide area. I installed the channel balances but when I bring the window down, the balances don't ... (cont.)

Hi Guys! I thought I had this figured out and ordered the 18-188 But the dims are SLIGHTLY off and there is a small lip on this piece of the top box that isn't on the 18-888. Do you have something closer to this? Let me know. Thank You! :)

Can't find a match in the 80 listed. To be used with S35-23. Window manufacturer unknown.

It is the clip or whatever it is called that is attached to lower window sideS and it brings Or holds the balance As window goes down.

Picture 1015 shows the good part on the right and bad part on the left. I will two. I also found a logo looked like ww or mm. Not sure that helps

Need help finding this top sash please. it measures: 1 5/16" long 1 1/8" the widest side (on top of the window) 5/8" wide thanks,

Windows are from 2004 or 2005. No markings on brand of window or identity on the sash guide.

Clip that is used to remove S380-33 channel balance Plastic clip that holds balance in window frame Locking Mechanism These are Anderson's retrofit windows

Looking for guide sash replacement part for my windows. Please let me know what may be the right replacement part. Thanks Rohit

please assist me in identifying top sash guides that I need. If I need to remeasure please advise.

I could use your help in identifying this sash guide. The home was built in 2009. Thank you.

Hi, Would you please identify the part number for this sash cam? Thank you, Denise

Couple of top sash channel guide broke. The length is about 1 9/16 inches, width at the top is around 7/8 inches and width of bottom is around 5/8 inches

I need (2) sash cams and (2) block-and-tackle balances for a Viking window.The balances are Viking # 2240 balances (9/16" channel width, metal channel length is 23 inches long). The black cams are connected to the window.Bottom section of the cam in window channel is 5/8" wide, and the top lip on t ... (cont.)