Viewing all customer Discussions for:

S351-24 24" Series 351 Channel Balance

Number stamped on the balance is23 C BSI The metal length of the rod is 24 inches

Length of the metal is 24" writing says 23 4 JS CALDWELL

I'm looking for windows parts for replacement. I need 4, 24 inches long, and 8 inches long. I measured only the metal parts, but I need the plastic parts as well. I need to know if y have them. Thanks. Olga

I need to replace several channel balances. The existing balances are from a 3'x4' single hung metal frame window installed in 1984. I also need to replace balances from a 4'x 4' single hung metal frame window installed on the same date. The balance for the 3'x4' window is stamped 2340X and the 4 ... (cont.)

Windows channel balances 24 IN long . Code # 23.3 E H .

Hi there!I thought I would have to replace my whole window, but then I found your website. The old vinyl sash window has no brand name that I can find. The sash weighs about 17 lbs. I don't have the hook part you ask for in the video. I think i threw it out with the broken cord. I hope I have provid ... (cont.)

Need slides for Alenco window. The metal channel measures 23 7/8 in. or maybe a little over. Has 23 C stamped on end All shown in pictures

Channel balance has a stamp that says 23-5 HI5 CMC 50. The metal portion of the balance is 24". Need to verify which balance to buy.

Patti post 01The numbers on the balance are 23 2 BV CMCWe are sending another post with four more photos

I need to replace balances on some 35 year old gapco windows. The only picture I have is attached. From another window, I was able to locate a stamping on the balance from another window that said 23 C. Can you help?

On Taylor Windows found part numbers 2520 2530 Need to know which S part number I need to order - I am confused on the top/bottom plastic pieces. Sent pictures of both ends of the sash balance. Thank you

Hello There,I need help in getting a replacement for the attached channel balance.Thank you,Marcello

The width is 9/16 and the length is 24 inches the k-23-4 I need 4 and the k-23-3 Ineed 2

Is 24 series 800 channel balance 23B correct option?

Hi. I am replacing my sash in my dining window.Andrea

I need a pair of channel balances (one window) per the photos shown.

Hello, I have several vinyl non tilt windows that open vertically with 2 channel balances that are not sliding smoothly (jerky/stiff especially when closing) and/or have one channel balance that appears broken. I have taken pictures of one of the windows to hopefully get some advice on how to selec ... (cont.)

My window would not stay up so I removed the two channel balances. They are marked with 23 9 BSI. The metal channel, not including the plastic parts, is 24 inches long. The width is 1/2inch on the front with the writing. The side width is 5/16inch on the side of the bar . I am looking to replace the ... (cont.)

I?m needing 4 channel balancers from end to end they are 30? and 1/2? wideOn the old one is the marking23 3 IL Caldwell.Photos of the unit and both ends are attached.Thank for your help.Charlie

Hello,I am looking to replace balancing hardware on my windows as it is broken. I have few different size windows. I was only able to attach pictures for 28in length one and other one is 24inch length. Both are 1/2in channel width and end hardware is identical. Windows locking mechanism has Alenco o ... (cont.)