Viewing all customer Discussions for:

19-005 Channel Balance Top, Winged

the top is a 19-005 but the shoe measurements are different than the 15-004 or 15-005

Good Evening, I am attempting to replace the channel balances on my windows. The manufacturer went out of business, but the home builder referred us to you. I have searched your website and found the most likely candidate for my windows would be the 1/2" channel balance series 385, 34" long, opt ... (cont.)

We would like to replace channel balances (stamped 2420X) for 4 windows (i.e., 8 balances). The balances are 25" long, and thus it appears to me to be Series 350 with 15-002 bottoms. The tops appear to be #19-004 or 19-031. Also, I need one take out clip #16-002. Attached are photos of the ... (cont.)

Help! I recently ordered and received a 31" Series 385 Channel Balance S385-31 option: 3030. I installed it without any problems. I was very excited about repairing the remaining windows in my family and dining rooms. I ordered six more pairs and began installing them. Unfortunately I have had ... (cont.)

I have searched your website and seem to have a part not readily in stock. 1. Channel is 30" 2. Sash weight is 19 lbs. 3. Channel Balance top seems to be 19-005 4. Channel balance shoe seems to be 15-002 By the pictures, do you agree? Will these need to be custom made and at what price? ... (cont.)

Could you please help me identify the correct parts based on the stamp on the balance. The stamp is 29 4 BS.L MH I'm not sure why this has 29 on it because when I measured it the measurements were 30' x 1/2 x 5/8 so I'm torn between 29 inch or 30 inch. I need the numbers for all the parts in m ... (cont.)

I need to order two different block and tackle glances for a few windows. Here is what I can find on the parts: First set: Lettering on the unit 30 9 BR CAELDWELL, Length 31", Width 1/2 " see pictures attached. I need four of them Second set: Lettering on the back 20 E 15, Length 29", Width 1/ ... (cont.)

I am a returning customer needing to buy two replacement channel balances for a Jordan non-tilt window in my home. The window sash measures 30 1/4" H x 28 7/16" W and weighs 20lbs. 14.5ozs. The numbers stamped on the side of the old balance are 28-3 and K 1. I think this is a series 390 bal ... (cont.)

I have two 2640 Sash balances that are needing replacement. My top part looks like the 19-005 while the bottom looks like a 15-002. What series unit would i use to replace the balances. Thanks Chris

You have a very easy to use web site, but I just can't figure out which channel balances to order. I need 34"L, 1/2"W full assemblies that have the ends to match the photos I've attached.

We are looking for parts for three Kenco windows. We have a 29" balance and are looking for - 2 springs and 6 retainers that screw onto the top of the window. I have a few more photos than what is attached and can send them if needed. Series Mark 40/50.

For Milgard 60" H X 36" W aluminum windows, I need 6 replacement Balancers. The stamp info says 25 3 B.S.I. PK. The window weighs 14 pounds. The shoe and top attached are winged and the shoe is 1" and looks likes 15-005 and the top looks like the 19-005 The confusing part for me is that the ... (cont.)

I have a 1/2" block and tackle balance stamped 273000H does this mean anything to you? Is it simply for 2720 window. The top looks similar to 19-005 and the 15-004 or -005. What series do you recommend? Thanks, Mario

Good afternoon i'm in the process of replacing a milgard window channel balance. the part is stamped with the following: 32 9 aw cmc 2 the balance is measured 33 inches long 1/2 inch can you advise on the replacement part --- i believe it is 33" series 380 channel balance option 3260 ... (cont.)

I need to replace a channel balance for a non-tilt window. I think I need either a series 350 or series 385, but I don't know the difference between 19-002 top piece and 19-005 top piece. The balance I need need to replace is marked 26 4 JR -- it is 1/2" wide and 27" long A couple ... (cont.)

I just received the parts, S351-24. Upon Inspection I realized I made a mistake in identifying the proper Channel Balance and the top piece is not correct. When I went back to your website today I could not find a match with the proper top and bottom. I have attached two pictures of the top piece th ... (cont.)

I have attached pics of the channel balances I am trying to replace. Looks to me like they are Viking Window balances with a 19-005 on one end and a 15-002 on the other. I do not see a combination with this option on your website, and want to make sure I order the correct ones. They are for three ... (cont.)

I have tried sending this to your discussion section but have heard nothing back. can you help?? I have attached photos for what I am looking to replace marked 2430. The length of the channel balance is 25" width 1" depth 9/16 to 5/8 This is for a Window Master series 420 I was looking at the ... (cont.)

S385-27 : 27" Series 385 Channel Balance option: 2630 The window weights 18.4 lbs I've recently purchase 2 of these Channel Balance and installed both to replace to ones I have on the window. After I pushed the window down into the closed position, the window sticks very badly whe ... (cont.)

I believe this is the part I need to order, can you verify from the pictures? The length of the Channel Balance without the plastic ends is 27". The stamp on the side is 2640N. Thank you. Kristi