Viewing all customer Discussions for:

S380-23 23" Series 380 Channel Balance

Hello, I believe these are 380 Channel Balances based on the previous ones I bought.However the lenght of the aluminium part is 23", not 24".I've double checked.Is it possible to get 23" channels with 380 fittings?Thank you,Foster

Hello - I'm looking for replacement channel balances. The broken ones are stamped with markings 22 C - it's a 23" (l) x 9/16 (w) (without the nylon fittings) and were installed in a window brand called Mildoor, Miami, FL around 1984 - 85; photos are attached. Thx - David

Hi,Yesterday I had an inquiry and your answer was perfect. I already have the items in my shopping cart, thank you.But before placing the order I saw that I have 2 windows that are not closing until the end, I mean, when it's fully closed it is not enough to lock it. I see the balance is a little ... (cont.)

I need to replace these window balancers. I need:(6) with the numbers 28 5 inscribed, 29"(4) with the numbers 28 3 inscribed, 29"(2) with the numbers 22 3 inscribed, 23"All of them have the same end piecesThanks for the helpGreg

? 22-9hb5cmc left side of impact window. I need one. Can you help? This is in my home.

Hi, The window channel holders needs to be replaced for the windows. Please help in choosing the correct replacement parts. thanks Mahantesh

Trying to identify what balance I need

Non tilting window, 22D USB stamped on track, 1/2" wide, metal track 23" long. Windows made by Florida Extruders International, in sanford fl. No longer in business. Ed

Metal part is 24 inches long. Marking: 22 3 D0 Caldwell Please help me identify the correct replacement part. I ordered S380-22 Option 2130, but it's about one inch too short. Thank you!

Item measures 1/2 by 23 inches (metal part) Is marked with 22 3 LR Caldwell. Came off an Insulate brand single hung window. Pulley cord is toast. Thanks.

Need to replace the pictured balance. It says "2230" on the side.

I really can't find a match on your site, I need to get a pair of replacements but aren't sure of the strength to order

Hello, I need custom balance rods to replace original rods as follows: S380 35" with 15-029 shoe replacing 3435 original rods. I think 3440 will do since you do not seem to have half sizes on window weight. I need 8 of these. S380 23" with 15-029 shoe replacing 2220 original rods. I need 2 of ... (cont.)

3 photos: Markings on balancer Photos of clips and end fittings.

Printed 22 2 K5 Caldwell Thanks much

The id number on the track is 22E. The length is 23". I need (4) complete with spring and pulley system. I can send you additional photos of the pulley system The track has 6 holes in it. The 1st hole is 5/8" Center to center of rivet. The next hold is 1/2" center to center 11/16" center to cente ... (cont.)

Need to replace window balances, my existing is stamped with 22E USB See pictures The length of the metal piece is 23", the width looks like 1/2" each end has plastic guides. The spring, cord and internal parts all came off. HElLP! Thanks

23" channel length. 9/16" wide. Need to replace 4 total due to break and loss if tension to hold window up.

it is 1/2 inch thick. it looks like the top is broken. it says B.S.1 2210 on it.

Plastic parts have broken down. Would like prices for the 2 clips attached to the window itself and replacement balances. This window is from a screen porch door. Thank You Nicholas