Viewing all customer Discussions for:

19-029 Short S-Clip

Could someone help me identify which part this is? The lower window doesn't stay up, and the upper window drops as soon as I release the lock. They are tilt windows, the shot with the code is from the good window and the shot of the upper spring disconnected is from the broken one. I can be reached ... (cont.)

House built in 1988 Solid wood sashes Milled aluminum channel section: J 24HDB 26 inches long 1/2 inch wide Five eights inch deep Quantity 2 (two) needed (one left, one right if applicable)

Please see attached photos of tilt balancers that I need replacements for. This is a plain channel balance, 26" in length, and has stamping of 26H B.S.I on the outside channel. Currently the balancers have a clip connection at the top of the window, but there is also a provision for screw in mount ... (cont.)

I have block and tackle balances stamped with "BSI" and 32HT on the top sash, and 32HB on the bottom sash. i can always get more pictures but this is all i have for now. can you help me figure out if these can be replaced with one of your products?

I need to replace four sets. What's happening now is the balances are not strong enough to raise the Sashes. The windows are 35 1/2 x 37 1/2. They block and tackle balances.

Color white, quantity needed 2 Balance spring assembly measures 28" long, ribbed outer Metal surround numbers on metal surround is DB L02 27 REG

The manufacturer is Jeld-Wen, purchased 2002 The Window Balance is a plan channel-see photo- The balance length as defined by Swisco is 42.75 inches-see dimensions photo- The window is wooden, double pane, 42.5" wide, 42.4 inches length The original Jeld-Wen balance is marked ODS 50B-see photo- ... (cont.)

I need a replacement balance with these dimensions.Not sure if the channel length is usually rounded off up or down to 26 or 27.Channel length 26.625 26-5/8"ribbed 5/8"deep, 9/16" wide24RB-BS1 stamped Window opening 32"x 54" Please see attached images.Stephen

Tilt Markings 08 102 22B

Looking for a balancer for an Atrium Double Hung Window, installed around 2005. The sash is 23x47 and the balancer is 20" long. I have attached 3 pictures of it - the bottom, middle and top. The balancer has 19D stamped on it. Please let me know what I should order. Thank you

Need replacement balances for 8 Weather Shield vinyl windows. Balances are stamped 28TG B.S.I. PO as shown in attached photo. They have blue shoes.

Feldco double hung vinyl window. Both balances broken on lower sash. I wasn't able to remove the bottom sash. Not sure how. There is still a plastic piece in the track that the lower window metal pivot pin is attached to. Balance number is 30D BS1 AV Thanks for your help!

This is a balance from a SEMCO wood double hung. The code on the balance is 30HB BSI Inc. The balance is actually 32 3/16" long. I would like to know if you carry this balance/ shoe combination, or if your model 751 will work as a replacement.

Looking for a replacement for this shoe off a Semco window in my home. I have a couple of spares but looking for replacements in the future. I guess Semco is out of business now.

Hello, I need two parts and I was hoping you could point me in the right direction. I believe 22F is the metal channel balance number, but it connects with a hook and not a screw. Do you have that option? Second, I need a white plastic replacement part to cover the metal balance up. It is 22" long. ... (cont.)

I am looking for a replacement window balance and am hoping you can help. The window is a Norco (jen-weld) D series double hung, model JEL-N-315. The metal portion of the balance measures an odd 30 11/16". It is imprinted with "28 RB". It was broken before I took it off, so the internals fell a ... (cont.)

Good morning , I needwould appreciate any assistance in trying to find the correct replacemens for my windows. First question is can I purchase the complete sash with the balances? Wood windows were installed in 1982, The number stamped on the balance is just "24, Any chance I can send photo's? Inte ... (cont.)

Marking on sash balance in M 28.

29 x 9/16 x 5/8 2830 JL stamped on side BSI Sash weight ~24 lbs

Looking for guidance on the correct balance replacement for the type I have in the pictures. I believe I need a S770 28E but my hanger type is a bit different. The picture shows a 28E and a 28F. These came from identical sashes. My sash weights 28.6lbs. Any assistance is appreciated. ... (cont.)