Discussions for S380-27 : SWISCO.com

27 inches

+2

. Good afternoon, could you tell me which spare part would suit me?

+1

Does the code after GM/HW CMC makes a difference when ordering window balances?

Hi, I want to replace the balances of two of my windows. Both are marked 26-5, so I plan to get a four S395-27. The stamp/code for the first window is 26 5 GM CMC 11 and the second window code: 26 5 HW CMC 7 Both are 0.5 inches wide. Should I get the same channel balances for both win ... (cont.)

Window balance

Balance is 27" long, 1/2 inch wide. 26C is stamped on the side.

+2

Channel balance identifier

Length 31 1/18

+8

Need part #s

There are two different balances on this window. One says "26 2 BV CMC 7". The other says "26 9 IP Caldwell"

+2

Channel Block & Tackle Window Balance replacement

I need to replace the channel block and tackle window balance, it is on a Milgard window, the channel is 27 inches long. Which one do I need?

+7

26 9 KT CMC 2

Hello - I need to replace the balancer equipment on a window. I think the replacement part should be a S385? I also do not know the weight needed, so short of weighing the window sash, I'm hoping you can confirm the model number for this replacement?

+2

Extended-Travel Channel Balance Quote

27 inches channel length-stamp 26 3 bsl VD

Extended-Travel Channel Balance Quote

L 27 inches Stamp 26 4 CJ bsl VF

Window channel replacement

Can you help me find the replacement window channel based upon this number that is on the original?

+2

Look for replacement for my old channel balance

The old channel balance is from Caldwell 26 3 . The balance length is 27 inch. Width is 1/2 inch. Sash weight is 25 lb. Please advise the series fit my window.

Need Balance spring help

Hi, I uploaded photos of my part needed to replace my balance springs. I weighed the sash at 14 pounds.I hope you can help me.Thank youLinda

+5

2630 Channel Balance

Length - 27 inches Stamp - 2630 Width - 1/2 inch I need two new balances.

+4

Channel identification help

Markings: 2640 BSI PF 9/16" wide 27" long 9/16" tall Plastic tip 12/16 of an inch to casing Casing fins 15/16" wide

+2

27 inch Caldwell 26 4 KP stamped balance replacement

Hello I would like to order two window balances to replace old ones. The old balances are stamped. "26 4 KP CALDWELL". They are 27 inches long. Any help with selecting the correct replacement would be wonderful. Thanks Tobin

+5

27" Balance

My balance looks worn, but appears to have a "26D" stamped on it. It's 27 inches long. Please see the photos. Let me know if you have any questions. Thanks. Jonathan

+2

Markings

The only marking or printing on the item is the 2620 stamp (picture included) and the other channel has 2630 stamped on it. The channels are 27 inches.