Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

I need help finding the series. they look like the S380 and the S385. The stamps on my broken ones are 2640 and 2930. These are for different windows.

Hello,My broken window balancer is 27 inches long, has markings "26 4 HV CMC 2", is from a Milgard window.Thanks,Mike

On the part it is stamped with 26 4 JP Caldwell Please help me to identify the part number. Thank you

The attached files show the balancer I wish to replace. It is stamped 26 4 HS Caldwell and the metal channel is 27 inches long. Let me know if you need any additional pictures to determine the correct replacement. Thank you, Ed

I need replacements for milgard window balances. Steel part is 27" depth is 10/16" and width is 9/16". Have attached pictures. I see a post on your site for someone else that had same model number, 26 5 GW CMC 4, but the recommended replacement didn't match the measurements on my balance. Any he ... (cont.)

I had the string snap on the other side. Looking to get replacements for both.

I need 2 of these to replace the one that broke. I ordered from Amazon but came with the wrong ends. Can you help me out

I have sent an email to help@swisco.com and attached photos here and there. The old channel is 27 long, the walls of the channel are 1/2" wide. The hardware at the ends are a little bit beefier than the balancers that I ordered. The email is long...

I'm looking to replace a 27 inch with the markings 26b. Thank you.

Hello, I need help with identification. It's marked as 26-4 Caldwell LL and measures 27" from metal to metal. There are wings on both top and bottom guides. I believe these could be a match for the 380 or 385 series, however when I measure the foot depth, I seem to be right in between 1" and 1-3/32" ... (cont.)

26 5 LU CMC 1

Hi I am looking to see if you guys have this window balance available. I attached 5 photos of the part that I need to replace. Thank you

Hi, the spring is about 27 inches long. Window sash weights about 22 pounds. The springs shows numbers 26 9 JW CMC 7. Can you tell me what part to purchase as a replacement?

Please help me identify these parts .Gus

27" long

27" Vance for a MilGard

Markings are 26 4 CT CALDWELL. the total length measures at 27"

Hello, I have a Mercer window and need to replace the broken window balance. Can you please help me identify the correct part number? Thank you.

I'm looking for a suitable replacement for this window balance. It measures 27" long (end-to-end of the metal frame only), 9/16" wide, and about 5/8" deep. The only markings read as follows: "(03/9) UNIQUE 26-E-50." Thanks for the help!

I need to know which part to order for my Kinro windows. They are 27" channel length and the width of the bottom piece is 1" (as seen in the photos. I have 4 29 pound windows and 1 14.5 pounds window that I need to replace the balances on. Please advise as to what party number I need. The balance fo ... (cont.)