Viewing all customer Discussions for:

S380-29 29" Series 380 Channel Balance

As you can see the pulley and spring have fallen off! the channel width in 1/2" . I need a new channel complete with ends! SOS! I appreciate your help! Thanks Janis Richter (doing this for my husband Peter)

1/2" x 29" balance. I don't know which balance to order. No markings on the window as to manufacturer. No wheel on bottom plastic part and it looks as if a tab has broken off one side. Ty

These are 1/2 in by 29in with a 28D number

I need a replacement balance for my dual pane, non tilt sash window. I need 1 but would consider replacing 6 if the price is not to bad.

Hello,I am wondering if you could please tell me the correct size of this window balance so I can order and replace. I had a few windows not staying open a few years ago and on the receipt it had 2820 wing ends? However, the only code I can find on the balance I just removed was 28C. I have attached ... (cont.)

I just ordered new channel balances S380-29 and S350-35, but both windows need new cap things to stop them. Can you help me identify this piece and recommend a replacement? Thank you so much for your help

This window spring is from a Milestone Single Hung Series 1000. Only marking I found on spring is 28C. It measures 29 inches in length. If you need more photos let me know, thanks

Hi I'm trying to identify what size balancer to order. 1/2 in width Lenghth (top to end of medal piece) 29 in Writing on the side 28 3 KW CMC 7 pics included

I'm going to replace the balancers on three windows also with the weatherstrip like a felt I also need the parts for the upper and lower part of the window frame. They look like guides please contact me when you get a chance. Thank you.

Balance is 1/2 in width (9/16th) and 29" long. It's marked on one side with 28B USB They are non tilt windows. I'm not sure the exact weight of the window.

Hi I am looking to replace my window balancer and was wondering which balancer would match what I currently have. The balancer length is 29" and has a code of 28C on it. Any help is appreciated. Thanks!

I need 4 window channel balances. The metal part measures 29". The stamp on the front says 28D and the window weighs approx 25 LBS. Let me know if you have any questions. Thanks

Need to replace the balances (both sides) in 5 windows. They are the original windows installed ~17 years ago. Can you please help me identify what parts I need?

29" long, 1/2" wide and the width of the shoe is 1". From what I have seen in your diagrams I'm almost sure that I need a S380-29. The stamp on the channel looks like it says: 28R, but it could be 28B, but the window weighs less than 12 lbs, so I believe I need a 2810. Please let me know if you agre ... (cont.)

The channels are stamped with the #2830. the metal housing is 29" long and 1/2" wide the balance shoe is 1" wide also need 4 top sash guides (1" wide)

I need the plastic upper sash guides and to different size balancers for two different size windows. One size Balancer has the numbers 28G stamped on them and the balancer metal channel piece is 29 inches. I also need a similar balancer that is 23 Inches Long and has the number 22E stamped on ... (cont.)

Hi, It is a 1/2" channel and measures 29" for the metal part. Please see attached photos. Thank you

Metal rail is 29" long (not including the nylon ends) Stamped with number: 28F

After texting with Steve, Itook better photos and measured the balances, they are 29 long and the window weighs 40 poundsHopefully this will be enough to identify them andi allow me to place an order.Thank YouMike

Hello, I ordered 4 items and apparently ordered a wrong size. Original order # 231748 Please view attached pictures and help me determine the correct size to match my original. Original unit is displayed on the Right side of the attached pics. Thank you, Also, are you able to forward to me a ... (cont.)