Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

KINCO 294 HW CMC 11

Hello, The house is 20 years old and has non-tilted windows. The metal part is 30 inches long. The top guide has wings on both sides and maybe the 15P142 based on some of my reading. The bottom guide measured one inches long front to back with wings on both sides and could be the 15P104 based on so ... (cont.)

For window

I ordered balancers and they are not the right size. I put the old one next to the one I received. The new one the white part on the bottom is larger. So the window will not close because it is too wide.

Balance is 30 inches long and 9/16 wide it is stamped 2940 at the end. I have attached some pictures of the ends. I need to know which one I need to order. Also I have a picture of a plastic piece that attaches to the window. I need to know which part I need to order

This is 30 inches long really need this part can you help

Please help with determining Part for Replacement Balance(s): 29 3 HT CMC 4 is stamped on the balance, and you'll see the top and foot don't look exactly like those you sell. I purchased some KITCO 18-166 top sash guides to go with the windows on which these balances go. Thank you for your very s ... (cont.)

Need 2 window balances 29 5 DX CMC 7

2930

I need to replace single hung, non-tilt ,block and tackle window sash balances. Old part has 2940 BS1 stamped on it. Channel width 1/2", length of metal 30",channel depth 5/8". Both top and bottom shoes are winged. Your series 380 has the correct top shoe (19-005) but my old bottom winged shoe only ... (cont.)

we have ordered diff versions from Amazon without any luck. please help us identify these parts. In addition to channel 2930 (in photo) we have a channel with another code: 29 4 BSL MH. We believe these are original parts for our home built in 2001 (Florida). thank you.

I would like to place an order for custom window springs. I need two 30" Series 380 2920 Channel Balance, but with a 19-005 top and 15-029 bottom. I also need two 5/8" Sash Guide, 18-161. Thanks for your assistance.

Price & Availability for 2 PCs. Thank You.

Want to replace all my window ballast in my home but don't know the series. Windows are about 28 years old, Harcar windows. Stamped number on this window ballast says 2920? The metal length is 30" Thanks, Ken Removed another ballast that says 1720, the length is 18 inches

Seeking information to order replacement channel balances (8). The number stamped is 2920P Thank you for your help. I think your website and customer support are fabulous.

I need 3 of these pieces and/or whatever holds them in place. They aren't sliding with the window anymore.

Tracks to make windows function. Pair of 3006 Pair of 2950

Need window balance bars. 30 inches long marking 2922DSBJ. See photos. Thank you Ron.

The balance spring pictured is 1/2" (9/16") wide and 30" long, not including the plastic fittings. It is stamped with 29 3. I have also included a picture of a release clip that I will need to order. Please let me know which parts to order.

There are two 30" per window I will need three total