Viewing all customer Discussions for:

21-401 Bifold Track, 3' Opening

Need track 36" for by fold door

I have an old closet with two, bi-fold doors that span 7 feet total. I'm having constant problems and they just don't move very easily. The top track looks fine but the bottom track seems to have old paint in it. I'm hoping new hardware will fix the problem without replacing the bottom track. W ... (cont.)

I need four to six sets of double bifold door hardware for approx. 1970's Float Away budget bifold doors.

We have two closets with metal bifold doors and I am THRILLED to finally be able to fix them. I need new tracks and new pins all around. Attached is a photo of the top pin on one door. Can you help me figure out what I need? Thank you!

I have three metal bifold doors that I would like to reinstall. One door goes in a 36" wide opening and two go into a 72" wide opening. I am looking to purchase the upper tracks and associated pivot mounts, and the lower floor mounted brackets. I do not believe that there was a lower track. If ... (cont.)

I recently purchased a rebuild kit for ~1980s mirrored closet doors. I cannot get the pins to stay in the pin caps as the pins pull out when opening/closing the doors. I reversed the spring tension on the doors(top: push up vs pull down to engage pin) and the pins still will not seat in the cap. ... (cont.)

Dear Sir,We are doing renovation on multiple apartments with older metal bi-fold doors. The hardware for most of the doors needs to be replaced. I have attached pictures of one set of doors and the existing hardware. I do realize that most of the nylon bushings are missing and the pin in picture #14 ... (cont.)

Hi, I'm looking into restoring these old metal bi-fold closet doors. I was wondering if you had all the hardware needed including the rails. I'll upload some photos.

Hello, I need the bottom tracks and track hardware for a bifold metal door. Which items number is it. The width of the door is 30 inches.

36" 1 72" 3

These are metal bi-fold doors. I've used in the past parts I got at Lowe's, but, they don't last, they are not the proper parts. The pins are 1/4" and the piece of plastic that rides in the track is 3/8". Can you help?

Probably from the 70's. Track is aluminum and close to 3/8 opening for bushing to ride in. The bushing shown must of had a bottom for the 1/4 inch rod or it would float up and down the rod and not stay riding in the track. The rod has a screw you loosen to raise it up and down, which should make it ... (cont.)

Good day, I purchased this "old"door to repaint and hang. Not sure whatparts are needed. I want all new ones. Can you help? I will be submitting an order for parts on a different type of door but I know what I need for that one.?

Good Morning! I need to know which will be replacement part for above bi-fold door top and bottom . Thanks

Hi I have a few older metal bifold doors that were installed with the pins and a track on the top and bottom. I'd like to reinstall them with new pins and new track on the top only and use a corner jamb if possible. What parts would replace what I have? The holes in the doors for the pins are 5/16"T ... (cont.)

I need a few parts for my metal bifold door.I need a track that measures 29-1/2"long or a 36" pc. I also need the bracket that the bottom pin slides into that mounts to the jamb or floor and the top guide and pivot pin..If you need any more information please let me know? Thanks

Hello I am in the process of remodeling my home and have 6 of these old closet doors. The doors are in great shape but the tracks and hardware are completely worn out. Do you sell replacement parts? Would be dissapointed to get rid of these doors. They are solid. Just old lol

hi, I need parts for this doors. do you have bottomless track?

Looks like I need for of the pins that help to hold the door on and the bottom track. The opening is 48" long. The track is 3/4" wide and 3/4" deep. The pins that hold the door on the top are approx 5 1/4" (plus the nub that is in the track) and the bottom pins are approx 6" (plus the nub). So, ... (cont.)

Hello, I need a new bottom track for a metal bifold door system. The track is 48" long, and 1" wide. Attached is a picture of one of the pivots. Can you advise me on the correct hardware needed? Thank you. P.S. I recently ordered hardware for my dresser drawers, and I wanted to say that the custo ... (cont.)