Viewing all customer Discussions for:

21-404 Bifold Track, 4' Opening

I need four to six sets of double bifold door hardware for approx. 1970's Float Away budget bifold doors.

We have two closets with metal bifold doors and I am THRILLED to finally be able to fix them. I need new tracks and new pins all around. Attached is a photo of the top pin on one door. Can you help me figure out what I need? Thank you!

I recently purchased a rebuild kit for ~1980s mirrored closet doors. I cannot get the pins to stay in the pin caps as the pins pull out when opening/closing the doors. I reversed the spring tension on the doors(top: push up vs pull down to engage pin) and the pins still will not seat in the cap. ... (cont.)

Dear Sir,We are doing renovation on multiple apartments with older metal bi-fold doors. The hardware for most of the doors needs to be replaced. I have attached pictures of one set of doors and the existing hardware. I do realize that most of the nylon bushings are missing and the pin in picture #14 ... (cont.)

Hi, I'm looking into restoring these old metal bi-fold closet doors. I was wondering if you had all the hardware needed including the rails. I'll upload some photos.

I don't know the maker of my metal doors, but the label mentions where to write for spare parts. My doors are missing some hardware, so I want to replace all doors with new hardware. My doors each have the three spring guide pins and the one threaded pivot pin. Can I replace them with the 21-001 ... (cont.)

Good morning,Would you be able to help me out at getting parts for my doorsI have 4 set of doors that are 4 feet and 1 that is 5 feet.I would like to buy the plastic caps for all of them.the pins look like they are 5/16 and the swivel one are also 5/16 but are smaller at the bottom where the cap goe ... (cont.)

I have some Leigh Bi-Fold Full-VU Metal Doors Part # 8433. I have one bedroom with the top track still assembled and hanging from the ceiling. I have the bottom piece of wood in place, but need the track that will work with this door along with the parts. The track is right around 4' wide. Do you ... (cont.)

Hi, I'm looking for the track to rehang old Fenestra metal bifold doors. Each opening fits 2 doors. Each door measures 24 inches. So I guess I need a 4' track. Would your 4' track work with these doors and the pins pictured. Thanks for your help.

I'm looking for a top spring loaded pivot pin a bottom adjustable pivot pin and pretty certain they are 1/4 inch dia. mounts. Also top and bottom spring loaded roller or guide pins. I need these part to fit the above pics which are the 23-409 corner connectors with the 21-404 tracks. Any help you ca ... (cont.)

Hi I have a few older metal bifold doors that were installed with the pins and a track on the top and bottom. I'd like to reinstall them with new pins and new track on the top only and use a corner jamb if possible. What parts would replace what I have? The holes in the doors for the pins are 5/16"T ... (cont.)

Hello I am in the process of remodeling my home and have 6 of these old closet doors. The doors are in great shape but the tracks and hardware are completely worn out. Do you sell replacement parts? Would be dissapointed to get rid of these doors. They are solid. Just old lol

1. Is Slimfold Bifold bottom track product code 21-404? 2. Does bifold track 21-404 come with 2 pivot brackets or do I have to purchase them separately? Pivot brackets are 21-200. 3. Do you ship to Canada? Thanks

Looks like I need for of the pins that help to hold the door on and the bottom track. The opening is 48" long. The track is 3/4" wide and 3/4" deep. The pins that hold the door on the top are approx 5 1/4" (plus the nub that is in the track) and the bottom pins are approx 6" (plus the nub). So, ... (cont.)

Hello, Can you assist me with obtaining door pins and track for these late 60's-70's metal bi-fold doors please? There are two panels. each are appx 24" wide. Each panel will be installed separately for two seperate closets. Attached pictures for your reference. Please advise, need parts yesterda ... (cont.)

Hello, can you help me with finding upper and lower tracks,door locators,slides and bump stops? Attached are my steel glass bi-fold doors with door hardware in place. I need 48 inch tracks

I am replacing a wooden bi-fold doors with metal. They are 4-feet in length total with 4 panels. Have tile flooring and wanted to see if I can install this with just the top rail only and get by using a wooden bi-fold door bracket on the bottom. Let me know the part numbers that I need to buy. th ... (cont.)

I'm replacing my hollow wood bi-fold doors with metal bifold doors. I looked at the replacement hardware I would need from your thread with similar metal bifold doors. My question is, will I also need to replace my track, or can I purchase a wheel cap that will work with my existing track? Here are ... (cont.)

I'm not able to tell what track I should purchase for my metal bi-fold doors. My doors are from the early to mid 70's. Our whole house has them but the one in the family room was replaced with wooden 6 panels (junk). The previous owner left the old doors in the basement thankfully. I am able to fin ... (cont.)

Hi, so glad I found you! I have some used mirrored metal closet doors. I believe I have all the hardware (2 adjuster pins and 6 of the pivot pins pictured...I removed when I painted the doors). What I don't have is the tracks and whatever hardware is needed for the tracks, I hoped you could help me ... (cont.)