Viewing all customer Discussions for:

16-024 Mounting Bracket

All I know is, I'm having a hard time opening and shutting my window. I don't know if that's the Spring that helps me open the window, I just don't know anything about this. I'm going to order some window tilted lashes, but I guess I should wait until I get an answer from you so I can order everythi ... (cont.)

The window springs are 9/16" thick, 1 3/8" wide to fit the tracks. The corner latch wraps the side.

I have included the window photo, balancer photo, and serial sticker to the window. We need a replacement balancer. Can you assist thanks.

I need to get a replacement balancer for the left side as looking from inside house for a tilt out single hung verticle slider. Markings show 8 for the top spring housing no marking on the bottom housing that I could see. Guessing 10 or 12? Also need the spring hook tool recommended for this as well ... (cont.)

Coils have an 8R and 8L also missing retainer. Windows were purchased from a local manufacturer and installer named Kelly Windows.

I have Gorell 5300 series double hung windows that I need to replace the springs and pivot shoes, will this spreader work or do I need to cut the frame? I would like to remove one so I can see if there are any part numbers on the springs and shoes to make sure I order the correct items. Thank you ... (cont.)

Need the part that the sash slides into on a Silverline 8501 series double hung window

I am looking for help with buying and replacing the coil balancers in the attached photos. Scott

pat 5.353.548

Hopefully the pictures and the notes help. Ugh!The white tag is the number on the windowThe silver band looks like it says 39W on bothI would need the entire assembly, the metal insert on the bottom which snapped, and the white metal clip which screws into the the trackMy cell is if you would like d ... (cont.)

Number on counter balance PAT5,353548

I am hoping you can identify this part. The track holding the ballast is very narrow and will need to be pry open to replace.

Hi, I have American Craftsman 8500 series double hung windows. I need 2 sets of coil balances (left and right) and mounting brackets for 2 bottom sashes which each weigh 15 pounds. Item 15-087 looks the closest to my coil balances and item 16-024 looks like the mounting brackets with one concern. M ... (cont.)

Sending a request for availability for window counter balances for one of my customers (please see attached pictures). They measure 2 1/2" x 1 1/4" x 1/2" with a single spring. Thanks, Chris

Need to identify the parts I need to replace. Coils on both sides seem fine may just have disconnected from the balance. I am pulling them out tomorrow just want to get a head start if I need to replace any of them.

I need help with these replacement parts. I believe the windows are American Craftsman . The latches and sash springs are broken. Not sure how to remove the lower sash. thanks

Need to replace balance shoe and pivot bar for top dash. Also need screws for the pivot bar since the originals were rusted fast and had to be destroyed to get pivot bars removed. Thank you. Kym

I have 4 coil balancers that went bad I want to make sure I have the right parts. Looks like it's stamped 7 on it. It is 2 7/16 tall 1 3/16 wide and 1/2 thick

Vinyl Double hung Gorell window is heavy to lift due to coil springs let loose from the bottom. Clips broke? How do you hook the spring to the coil housing? Do you start at the bottom or the top? Where does spring get hooked on the bottom? Which way should spring face? Can you show me pictures of h ... (cont.)

will the s161 balance be a good replacement for this caldwell coil balance? i located that part number in my subject lin from another online sell windows hardware direct, however they are out of stock.