Viewing all customer Discussions for:

33-072 #8 x 3/8" SS Pan Head Philips Screw

Grey metal U shaped device on bottom is broken on one side Need 2

Entry Way Window (Single Tilt Out): Installed 9/2003Lower Tilt out Widow: Approximate Size: 30 1/4 inches Long X 26 5/8 inches HighWeight of Single Tilt Out Window: Approximately 19.5 poundsMy window broke when I tried to raise it up. There is a coil just below the mounting bracket on the left sid ... (cont.)

Have not removed the broken ones yet.1/2 " thick and attached to this coil part.

I have several windows in a beach house that have broken tilt window latches, highly corroded pivot feet and a few broken springs. I think your 26-243 and 26-244 top tilt latches should work. I believe the channel is about 1 3/8" wide, so maybe I can use the 15-191 or 15-111 pivot foot? I'm not s ... (cont.)

Vinyl Double Hung Window Sash balance Has #9 Stamped on the metal band. Metal band is 1/2 "

I need help identifying each part in each photo that is attached. Both top and bottom windows need replacement parts for being held up and the metal foot that rotates the metal shoe.I believe this is the window brand logo, I can't find any identifying number or name for it

this part fits into the groove in a tilted window. This apparently holds window up because it will not stay put. thank you for your help

Confused about what replacement pieces I need to purchase. The left coil balance housing has a "13" marked on it, and the right side has a "14". I don't see a marking on the shoe.

Window TRUDH - Frame. 22680

The metal part of the pivot shoes on the window. I think they are Mezzo windows installed within the last two years.

I have six vinyl double hung windows with various pieces of the sash balance system in disrepair. I would like to purchase 8 sets (coil spring and accessories, pivot bar, brake shoe) of better quality since the homeowner appears to be rough on the existing ones. The pivot bar is 2 1/4" long, has a ... (cont.)

I'm seeking replacement spring/balancer on double hung vinyl windows. Each panel has 2 springs, the top piece that holds the coil spring has a "B" cast into it. The bottom receiver appears to be some sort of alloy.

I need two complete coil spring assemblies as shown in attached pictures. The coil spring is .492 inches wide.The metal window anchor is 1.500 inches long, 1.250 inches wide and .586 inches thick.The plastic coil spring holder is 3.500 inches long, 1.258 inches wide and. 612 inches thick. ... (cont.)

I am looking for a replacement for this window balance which I removed from my window. I need two, one for each side, as they are both broken. There is no identifying information on the balance or the window that I can find, other than a small "5" printed on the coil itself. The white cover pie ... (cont.)

Plastic part #A186160 Spring 406 J

In need of two (2) window shoes seen above or attached.

The width is 1 1/2.

Latch Dimensions are: W .75" L 2.625" H .4375" Coil Balancer 25"

Top window falls when window is unlocked

I need three parts total. The left coil spring is broke took picture of right intacted. The I need the two spring loaded parts on top of the sash that you retract to pull the top of the tip out. The left and right side are both broke. This is the inside sash on the bottom. Client believes about 20 ... (cont.)