Viewing all customer Discussions for:

33-072 #8 x 3/8" SS Pan Head Philips Screw

Trying to replace the balance coils on a double hung window and can't seem to find the right ones. This is a double coil with 5k stamped on both coils. I'm looking to replace the coils and the "shoe", I think that's what it is called. Any help would be much appreciated. Thank you ... (cont.)

As you can see, the shoes are trash, both the upper sash supported by the tri-fecta of springs and the lower sash sporting two spring sets. Our sloppy measurements from a tape measure appears to be 1 9/16, maybe 1 17/32nds wide by 9/16" thick. I believe the height of the shoe is a mute point. Str ... (cont.)

the spring coils are ok. but need all other parts

I am not sure which part is right for our windows. Please see attached photo. The pivot shoe measures 1.25" H x 1.5" W x 9/16" D

Hello, I am wondering what the closest parts you have to the featured parts in the photo. Windows have no identifying markings. Thank you.

Hi! Can you please advise what part number I should order to replace this window shoe balance? The pic is uploaded. I would like to order the shoe along with the coil attached. Thank You

Hello, My broken 1/2 inch coil has the letter B stamped on it. What coil balance series and weight do I need?

Pivot shoes broken Springs seem alright

I need to replace the single spring coil shown in the attached images. Can you please tell me what I need to order? The spring is .5" wide.

I was asked to provide additional pictures. The first picture is the broken sash and the other is a complete working sash. I am wondering what sash these are and if you have any replacements. Thanks you.

I have Certainteed double hung windows that came out of the shoes. When we tried to put the top window back in the shoe, it broke.

Hi there, Looking to identify the hardware for these double tilt sash windows on my second floor. The windows will not stay open so I believe a new balance & pivot lock is needed? Thanks so much in advance.

After watching your video, I removed the sash. There is no cutout to slide the hardware out. Do I have to make one? thanks Patrick

Hello.Trying to find a replacement spring ballast for my mother-in-law's double-hung window. Measurements of the old ballast are: 1 1/4" wide; 1/2" deep, as close as she can figure. Cannot find a manufacturer. Enclosing picture of label in the window with some identifying numbers, also separate ... (cont.)

Certainteed Vinyl replacement window

Need to replace balance shoe

Not sure but these windows may be Viwinco, not sure. Need the sash bits and the bits that pop into the track and get screwed in.

The window I need to repair is manufactured in 2014 by Alside. The serial number on the window is 254-061257. I need the Balance Shoe and 2 1/4" Pivot Bar.

Please help identify this balance shoe. Spring is fine.

Looking for assistance with three broken window pieces 1. The first (picture titled window 8) screwed into picture titled window 4. There were two that broke and the top part of the window came crashing down when opening. 2. The second piece (picture titled window 7) came from the bottle inside ... (cont.)