Viewing all customer Discussions for:

S795-28 28" Series 795 Channel Balance

Only description I see is 28C. Need to order a decent amount of them.

I have replaced several of these in my windows. The old kind and the new ones. The newer ones say read 28c.

It measures 28" long , by 1/2 " wide has along spring is 14" long and two pulleys. Do not know the window brand.

Hi,Our windows were new in 2008 (manufacturer unknown) and many of the channel shoes have broken at the end that hooks into the channel track. It looked like your 15-194 channel shoe would work but it just doesn't quite fit. The channel balances all seem in good condition (no rust, cords all seem ... (cont.)

I need the correct part numbers to replace the balances in my windows. I have attached some pictures of what came out of my window. I did not include a picture of the Print Balance part 26-021.

Hi, looking to see what parts I need to replace this.

I'm in need of balancers for single hung Pella PVC windows. The sash size is 49"X 27.75". The balancer series is a 28G. 28" LengthPlease contact me with availability and price on these balancers. I will need several sets. Thank youTony

Metal channel is 28 inches long, part is marked "Unique 27-C-30". Nothing looks broken, but block and tackle mechanism with the string doesn't appear to work anymore. Have another window with similar parts, marked "Unique 27-B-20".

Attached are photos of the spring assembly I have. The assembly measures approximately 28". The windows are Jen Weld, but I do not know the series. The window size is 36" wide by 60" tall. Thank you.Rob

I need to locate a few replacement window balancers. The current ones have the markings in the picture. Can you advise the correct replacement part? The metal part is 28 inches long. This is a tilt window. The width is 0.5 inches. I don't see any tabs on top, and the bottom is T shaped (1 inch ... (cont.)

I need a quote for the following, you recently made some of these up for me. 10- 28C Stamp Series 795 Balance with the 15-194 shoe and 15-198 hook attached.

I am the warehouse manager and I need 60 balances see pics

Just wondering what part I need. I need like 16.

Recently I purchased 795S balances and unfortunately, they don't fit my windows. I have attached a picture of the balance that I removed from one of my windows so that you can guide me ordering the correct part(s). My contact information is below:John Thank you for your assistance. ... (cont.)

I have a project to renovate 117 townhouse units and I need to fix any window with balances that do not work. The balance has marks : BSI, RA and 28C. Your help would be greatly appreciated.

here is a picture of the original channel balance. You will have to enlarge it. The top channel balances are labeled 28-c. The bottoms are 26c. The hook has to fit into a hole in the trim behind The channel balance. inside a small hole in the trim.

Current stamp shoes as 28C. Does pivot shoe come with order. Please advise. Thanks Rajeev

I am looking to order (4) S795-28 with a 28D stamp. I'll need the 15-198 Hook as well as the 15-194 T-Lock pivot shoe. Please let me know if you'll need any other information from me.

Hello, I'm looking for this window balance.

I would need channel 795 20B with a 15-194 1" T lock balance shoe and a 15-198 balance clip attachment.