Viewing all customer Discussions for:

S795-28 28" Series 795 Channel Balance

I have several windows that have broken block and tackle systems, broken lock in clips. Not sure what to get. I took picks if semi working ones Says BSIN 11 28C

I would like to order (4)S795-28 balance with a 28C stamp and a 15-198 hook attached. Please let me know if there is anything else you need from me.

I have attached photos of each end of a 28" x 9/16" balance. The only marking on the balance is 28C. Can you help identify an appropriate replacement? Can you recommend a pivot shoe that would work with this as well? The existing shoe is 1 1/4 x 9/16. Thanks

The windows are vinyl double hung and are about 18 years old, they tilt in and have 28C channel balance spring assembilies.It seems the locking shoes have deterioted over time on a number of the windows and should be replaced. One the spring asemmblies is missing - so I like to get a new pair for t ... (cont.)

Metal is 28" long. No clips in vinyl windows frame, just string attached with screw. Single hung, tilt

Hello; Hope you can help. I will need a replacement of a Balance Shoe. The indicated photo is the part needed. No more information is located on the part. I believe that I do have the 15-194 shoe though. The balance is 28" long. If you need more information, please let me know.Thank you very mu ... (cont.)

Hello I need to order several of the S795-28 with clip attachments. I cant send a picture but I understand this is a custom order. Could someone help me with this? How long does it take to receive the order once placed? Thank you

I'm repairing several Milgard Vinyl Tilt Double Hung Windows. I purchased and installed several pivot lock shoes (part #15-236) and tilt window laches (part #26-243 and #26-244). Your parts were a close match for the existing parts and worked well. I would like to replace the channel balances on ... (cont.)

Hi I have the exact same problem. Please email me a purchase link. Thanks Jim

Looking for one window balance top has a clip that goes in hole at top of window bottom shoe measures 1 inch. Stamped on face 28C Greg

28" with tilt No markings or numbers found

I am currently looking to replace three sets of Series 795 channel balances with 15-198 hooks and 15-194 shoes. Below are the balances I'm looking to order: S795-26 option 26C S795-28 option 28C S795-32 option 32C Please let me know if you'll need any other information from me.

The balance with the green part at the end is 27 1/2 inches from the top of the hook to the bottom of the plastic. The broken balance is 28 3/4 in (without the plastic endcap). The plastic part is 1 5/8 inches from the top to bottom. In case it's helpful I've added pictures of both balances next to ... (cont.)

Please help identify the replacement balance & pivot shoe for a Pella window. It is a 1/2" Block & Tackle Channel Balance that is 28" long With a marking of 28B BSI The pivot shoe has a patten # Stamp which is 4610108 & also Patten # 6,679,000. Approximately 1 3/16" wide & 3 1 ... (cont.)

The end of the balance has a fold which prevents this shoe from being installed. Pictures of the balance and comparing the height of the two shoes are attached. Do you have something like this, or is the next step replacing the balance assembly? The 15-194 is the correct width.

28 inch long window balance(28C) and a pivot lock shoe (1") for tilt windows.

I am looking to order (20) S795-28 balances with a 28B stamp. There is a 15-198 top hook attached. Please let me know if you have any questions.

Need channel balances, swivels and swing locks. Chanel's measure 28" and are stamped 28C

I need 28"Series 795(28B)channel balance w/15-198 clip, and 15-194 Shoe I need 28 of those. also need 14"(14B) BSI with the same clip and shoe I need 4 of those.

Hi, trying to locate these balances for tilt-windows. Please let me know if you need any additional information. Thank you!