Viewing all customer Discussions for:

33-073 8-15 x 1/2" Truss Head SS Phillips Screw

No visible numbers on the coil.

It appears the bottom part of this plastic thing broke, thus not letting the window stay up. It is a double pane window. (Upper and lower) Top of window has sticker reflecting 1650. Thanks for your help.

This is the part on the left hand side of the window. Do you have a replacement?? If not exact do both sides need to be replaced with matching parts ? Thanks

Seeking party please help

Looking for this balance

The attached pic is for a broken 20 year old window balance. It measures 1 3/16" wide and has 8 stamped on the coil. HOWEVER the window glass was recently replaced; the entire frame plus glass now weighs 25 pounds. I suspect I need two S140-13 replacement parts, would appreciate it if you coul ... (cont.)

Please do you have this Balancer part ? Thank you

Hello, moved into a 20 year old home and windows in office won't stay open. The above piece in the picture is screwed in the rail, while the bottom piece is what the feet of the window slid into.Some further information:These are 59.75x35.75 double hung vinyl windows with two windows in each pocket. ... (cont.)

Hi there, my windows do not stay open. I believe this is the part that has failed. If you could identify this that would be great thanks.

Looking for a replace part for the balance, pivot bar and other related part The sash size approximately 30 x 30

Hi there! I can't find anything on the old (broken) piece...no stamp or numbers/letters anywhere. Any chance you may be able to help me figure out what to order from these pics? =) The measurements are identical to your single unit, but I don't know which band to select since there's nothing on my ... (cont.)

My single hung window's balance system was broken. The window was manufactured by MI window around 1996. Please help identifying the part number and what part can be used to replace it. Thanks.

Several balances are broken per the photos. There is no weight number on them. I also need the pins. The screw hole for that is 2 inches from the end of the pin per the photo. These are screwed to the frame through the middle of the spring. I estimate the sash to weight 15 lbs. I am very handy and c ... (cont.)

Hello. Have approx 10 windows that need sets of these.

Need a replacement for this part. Mine is broken and to replace the window woulds be very cumbersome since the fin is in the wall and exterior is stucco. No name on the window but this is the image and Google provided you're company on the search thank you

Window brand: None Location: kitchen. Double-glass panels, tilt-out, only the bottom sash slides up and down. The coil is broken. I need to fix it, but I don't know which brand it is. Can you help me? Thanks

Please let me know what measurement(s) are required to identify the part number of this item

How do i find part number or window brand ?

Need to do 2 windows

This is the 2nd window that has a problem with this part. The window is not vinyl.