Viewing all customer Discussions for:

15-181 Double Support Detent Clip

See picture for description dimensions and weight of sash. No numbers but found warranty page in documentation. Not sure if that's the same window. I need a new coil spring assembly for the left side facing out. Please provide the right part number for the replacement. Thank you,Terry ... (cont.)

Please provide price for the coils and hardware shown. I want to replace the coils and hardware for two windows both left and right sides

Needing 20 pound window shoes as pictured. Please let me know if you have. Probably need at least 4 of them. No names or numbers seen.

Hello,I was hoping you could help me determine replacement parts for my window. I would like to replace all the hardware, not just the spring. I need them for both sides of the window please. The window is 14 lbs. I have included pictures of the broken part and the peg on the window. Let me know if ... (cont.)

Hi, I have multiple windows which need their balances replaced. I haven't looked at all of them, but I will probably need 6 pairs. My window sashes weigh about 19 pounds. How can I determine if your hardware (for example https://www.swisco.com/10-lb-Single/pd/Series-140-Quick-Tilt-Balance/S140-10 ... (cont.)

Hello, I am looking for the window coil balance in the photos. The only information about the windows I can find is that of the Quality Control & Testing AAMA Certification Program, Series: 3500, AAMA/NWWDA 101/I.S. 2-97, H-R20-48x78 H-R35*-36x66. And warranty information: MI Windows & Doors 1 ... (cont.)

HelloI'm looking to replace the sash tension assembly on the left side of a hung window. I could not identify the manufacturer, but believe the "pros from Dover" i.e. SWISCO staff, can help to identify the replacement part :-)Thank you very much for your time and support!John

Attached find pictures of a double hung window with Coil Balance Springs. This is one of the top Coil Balance Springs which broke. The Springs are numbered 7, the Double Detent Clip is broke on the top this can be seen in the pictures as you can see both of the springs broke and need to be replaced. ... (cont.)

Hello I am looking to replace the left and write balance from my window. Do you guys carry these? Thank you

Have Capital double hung replacement windows that were installed in 2000 - bottom vinyl sash is 28 in. wide and 22 in. high. Window coil balance springs snapped on two windows and the coil springs are 1/2/in wide. If better photos are needed let me know.

After some googling, it seems the part I need will be the coil and support for Capitol windows.Thank you.

Need help on this window balance for replace?

The sash is 27 wide by 32 high. Only label is pictured.

This part came out of a vinyl replacement window. it's a double-hung 30"W X 61"H.The only markings I saw was an H on the back of the paw (the part that holds the window) and the number 4 stamped on the coil.Any advice would be appreciated.James

I need one left hand and one right hand coil balance. It may be hard to see in the photo but the number "8" is stamped onto each spring.

Bottom circular portion is broken

I need a replacement coil balance and pair of tilt latches for a window upper sash. The window sash is approximately 30in. tall by 24.5in. wide. Overall window opening about 64in. tall. The only identifying mark on the window is the number a-x7164 on the screen. Thank you!

Old windows. No identifier anywhere. I need to pull the existing corroded Pivot Bar to see what size, etc. However, looking to replace the coil and 2 other pieces needed in the pictures. Lack of knowledge to name each part. Sorry. Thank you

The first two pictures are the broken pieces attached to the window frame and the third picture is a complete piece from another window.

Hi, my window won't stay up. Can you tell me what part this is?