Viewing all customer Discussions for:

15-181 Double Support Detent Clip

no markings on window

I need the part where the window goes in on each sides so the window can slide up and down I need both sides.

This a coil spring for a Certainteed lower inside sash. I need help indentfying your part number

Please help me indentify the tape balance in the pics. This is for replacing the coil in the balancer of a double pane window. 24"×16". Thank you.

can someone please help me identify the name/part number? At this stage, does the whole spring unit need to be replaced, or does this little plastic cracked piece usually resolve the issue?could i have part number for both?thank you

The hardware pictured above needs to be replaced from both sides of the same window. The only identifying markings I can see is that the coil has a "7" on it and the two plastic pieces have a "G" on one side and a "A" on the other. The sash itself appears to be approx 23" tall. It's a standard vinyl ... (cont.)

Pin replacement to sliding guide. 1st pic shows pin missing.

Hi, I think I need the 15-177 coil balance shoe, the 15-144 coil bushing cap, the 15-145 coil support barrel and the S152-7 7 lb 152 series coil balance (the current one is stamped 7) and 33-072 Philips screw. 2 of each, but I’m concerned that the shoe may be too wide (the current one measures ... (cont.)

I am looking for a coil balance pivot shoe like the one pictured. Specifically, if possible, I just need the cam for the one that is missing. The shoe is about 1 3/4" tall and about 1" wide. This is a duplicate post because I gave the wrong email address and accidentally hit submit before I could co ... (cont.)

Only # on coils is 632

I am needing to repair a bunch of windows that do not stay up. This is the part that slides into the side of the window frame. There is one on each side. The pin piece is Alison broken.

Hello, I need help replacing this item. It's 4 inches tall. 1 inch width. The bottom part has broken off. Thank you.

This is the spring balance. As you can see the housing is broken. I need help finding this part.

My window does not stay up...keeps sliding down. I saw the broken parts and coils. I think I would need the sets of coil balance accessories. I found the letter saying "Duraseal" on the window seal but not sure if it is related to the parts. Could you be able to help me to identify the parts? Thanks ... (cont.)

I just submitted a request to help I dentify a part, then I found this page on your web site that enables me to upload pictures. Sorry for the duplicate request. Have MI Windows manufactured on 2/9/2006. The coil spring is 1/2" wide, and the bottom window that it is attached to measures 35"H x 33.7 ... (cont.)

Also need the brass pivot rod that attaches to window and inserts into spring assembly. Not sure if I should replace the entire assembly or just the spring. Thanks!!

So the plastic part on the bottom broke. If someone could help me identify that part so I could fix the window would be greatly appreciated.

Top of this sit at 34" above the sill. House built '98. I am looking for part number for the springs, shoe and the coil cover.

Hi, I need a replacement coil balance

Good Morning, I have many Modernview windows with this bottom tilt window piece. Can you identify what I need and do you have it in stock?Thanks,Ray