Viewing all customer Discussions for:

15-195 1-1/4" T-Lock Balance Shoe, Closed Cam

Please identify this part with the proper number

Going to try to fix this myself. Pivot lock shoes are broken or separated from the channels. 4 windows both sides. Not sure of size of pivot lock. 1 1/4 inch? Channel has 32c BSI or BS1 stamped on it. Not sure if that helps. What should I order?

I need several balances as well as shoes. I believe my channel.width is 1 1/4. The balance has 27B BSI engraved on it. I have several windows with broken balance. I assume they are all the same as the windows are all original and same length. I have submitted pics with the hook at top of balan ... (cont.)

Hi. I am looking for the following two parts. could you please help me locate the correct part. Thanks,

As you can see, my channel balance has a hook at the top. I have ordered the 795 30B channel balances and installed them using a screw I had at home. Needless to say, the screw has popped out and the balance disengaged. What would it cost for two 795 30B channels with a hook and also four 795 36B ... (cont.)

Has a closed shoe on bottom and hook on top. I need two new balacers

Hello my name is Dennis. I'm in need of 2 complete balances with hooks and plastic bottom fitting pieces. I need help identifying which part I need to buy. Thanks

I'm purchasing a condo and one of the windows is not working correctly - basically it doesn't stay up. I can see the balances are not working as they should. Can you let me know what parts I need to purchase?

I have several windows where the block and tackle has separated from the shoe it appears that the plastic shoe has broken at the top. Can the shoe be replaced or is it part of a block and tackle replacement kit?

Hi there, I am pretty sure that I read another posting where this balancer would be a custom make. It's stamped with a 27B channel, and has some perhaps unique ends. One is completely missing from my window, and the other appears damaged. Here are pics of the other with a tape measure next to it. ... (cont.)

I am trying to find replacement parts for the item in the photos below. Please let me know if you can help.

Numbers on spring cover is 28C BSI TH and on the busted clips D467490 The plastic clips that connect to the metal spring broke off due to East to West sun exposure. Do I need a whole new kit or can I just replace the busted plastic part.

Need to replace this part and all required parts to fix. Thanks

2 separate balances Hope the images with measurements work. Let me know. Thanks,

I am looking to order (2) of the 26" series 795 channel balance with a 15-198 balance clip installed my numbers on my original part is 26c BSI.

Need your help replacing about 50 clips for Milgard windows, I have a photo I can send, the clip goes at the top of the line attached to a spring, they're tilt out windows, probably about 20 yrs old part is attached by a cord to a spring fitting on either sidenof the window. I'm sorry I'm not well ... (cont.)

It's for tilt windows, I see markings of 26-5, TB and BSIN. These balancers have 3 solid sides with a spring on the open side. Cord screws in on top and these go inside the channel....I am unsure of the ends of balancer, I see a plastic piece that is in the window channel and sent you a picture. T ... (cont.)

My channel balances are 1/2 inch wide and 26 inches long. There's a clip on one end but nothing on the spring end of the one I have off. The smooth side has 27B BSI stamped on it. I need to replace these in several windows and want to ensure I have the right balance and any other necessary parts or ... (cont.)

Grey pivot part on left side damaged. Bar in good condition. Other pic is window information need to know if Grey pivot part able to get . if enough info

It has a pat # but I can't read it. We sold a couple of manufacturers with these 1 being VinylKraft windows and the other one Atrium windows.