Viewing all customer Discussions for:

S160-10 10 lbs Series 160 Coil Balance

Hi, I have a double hung window that will not stay open. I know I need new tilt latches and the whole new balance assembly including spring, shoe, and cover. I was hoping you could identify the parts that I need to buy. Also, if you could tell me where I could buy the parts, that would be amazing. A ... (cont.)

Hi, Have no marking on old coils. Cassette at top of sash housed double coils on both side. The length of the sash from the bottom of the cassette housing at the top of the sash to where the shoe with the window closed is 53". The window weighs 20lb. Wish to buy the entire balance assembly (casset ... (cont.)

I am looking to replace a broken balance on a single hung Pella window. do you have this part?

I only have a picture and I know its a 20 lb. Only one window opens. Can you identify from this picture?

I'm needing help for a window I'm replacing coils and balance on I believe it's the wrong one that I took off for the weight of the sash the window weighs 50 pounds and it has 2 coils for each one with 10.0 Stamp on short tail coil and long tail coil can you let me know what I need for the right wei ... (cont.)

I have a house of Pella vinyl windows I installed. From day one, some of the windows wouldn't stay up in sections of their tracks. I took a look at the shoes and springs and the windows that won't hold seem to develop gaps in the springs. On one window I removed the shoes and springs, cleaned the ... (cont.)

The window weighs 20.6 lbs. The coil balance is a half inch wide. We can't find any no on it. I will include a picture. I hope this is all the info you need to tell us which one to use.

Please help me find these parts and part numbers thank you for your time and help

Good afternoon! I have three of the same-sized double hungs (regular Low-E w/ GBG) that the bottom sash weighs exactly 20 pounds. Including original order number from 20 years ago. I have attached a picture of the tilt button, spring, and tilt assist. I ordered the tilt buttons, but as you can ... (cont.)

Windows are MI Series #380 DH Coil Spring has no part number but printed on it is: 10# 35" 037 Z Coil is 1/2" thick and 35" long I believe the follow are the part numbers. Please Confirm: Coil Spring Part number is : S160-10 Pivot Shoe Part Number is: 15-199 Coil Single Support Part Number is: 15- ... (cont.)

I need replacement for the white piece in the photo. It holds window to the frame at any position, sliding up and down. Picture shown is at the bottom of the window, with window open 90 degree to expose subject part. Frame is vertical and bottom window horizontal to the left. I cannot make picture ... (cont.)

My window will not stay up. I need the side holding devices. Pictures are attached

I need a replacement balance for a Pella 150 double hung window manufactured in 2021. The balance is a 2 coil constant force balance (shown in catalog). I'm not sure if it comes with the frame attachment screw or not, but I need one of those also (pictured). If you could direct me to the parts that ... (cont.)

I need coil spring balances for Pella windows that were purchased in 2019. They are a 250 series. I have some with 1 spring and some with 3 springs. I know they take the S160 coil spring. I need coilsprings, shoes and the anchor in which the end of the spring is attached. Shoe is 5/8"thick x 1 1/4" ... (cont.)

I am trying to find two replacement window channel balances for the window in the attached photos, and any instructional videos you may have.

i am looking for 2 window balance as shown in the photo they have a #30 on them and are in American Craftsman window.

I have a window which will not stay in place when opened and it will just slide down. After doing some research, it appears that the window balances will need to be replaced. The house was built in 2015. Please let me know what the replacements parts would be. Thank you!

I need parts that look very much like your Part 15-191 Heavy Duty Pivot Shoe 1/2" Thick. See my photos. My sash weighs about 19 lbs., so estimate need 9 lb. or 10 lb. pivot shoes to work with it. My dimensions (shown in picture), are 1/2" thick, 1 1/4" wide, 2" high. Does 2 of these seem right fo ... (cont.)

I have a new construction home bought brand new and it's two years old now I have a problem getting a replacement part because the parts are no were on the internet or hardware stores. The windows don't have a name anywhere on them just sizes and I can't get any info from the builder. really need so ... (cont.)

Hi There, I need coil balance (Sears) for 19 lB Sash, Is your S140-10 right one to use? Please see my photo attached. Thanks a lot!