Viewing all customer Discussions for:

S385-21 21" Series 385 Channel Balance

Please find for me a replacement for the part below in the picture s

1/2" wide, 21" long (the metal section only). It is marked 20 4 KS CALDWELL.

The metal balancer is stamped with "2020". The length of the metal portion of the balancer is 21". The u-shaped balancer dimensions are 5/8" in depth (height) and 1/2" in width. No make or model name on the vinyl windows that were installed in the house 24 years ago (2000). I would like to purch ... (cont.)

Looking for correct cross reference balance number to order and purchase (4) new replacement balances for (2) of my Milgard windows. Metal frame length is 21". Both nylon ends have wings. Old balance identification number is (blue letters) #20-4 FQ CALDWELL. Please see attached photos showing, full ... (cont.)

This length is 21 in. Measures 1/2 on back and side. The open side seems to be 5/8. 20 4 DV CMC 7 is the part #. Do you have the part available?James

Hi. I think I need the S385-21 but I am unsure if I need the S380 or S385. Can you please review the attached pictures and provide your advice.

21 inch balancers, metal channel measured only. From a Milgard window, balancer marking was: 20 4 AR Caldwell.

The window is from a Cavco manufactured home. Looking for new balance sash

Caldwell 20 4 HQ Please help identify.? How do I tell the wait

I need to replace these window balancers. They are stamped "20 4 FJ CALDWELL". The metal channel is 1/2" wide on the closed side, 5/8" wide on the open side, and 21" long. The show on the bottom is 1&3/32" deep.

Needing three different sizes of window balancer. They are fitting Milgard windows. On the balancers, there is printed the length and "JP CALDWELL". The 3 sizes are as such:23.4" JP CALDWELL (4 needed)20.3" JP CALDWELL (2 needed)14.4" JP CALDWELL (2 needed)All 3 sizes have the same types of ends and ... (cont.)

I want to find the correct balance for Milgard Aluminum windows from the early 90's. This is a block and tackle style balance. The metal portion of the original balance is 21" long. As may be seen on image labelled balance-0, the balance is marked "20 4 EL CALDWELL". I believe the balance is 1/2 ... (cont.)

The one in the pics is 28inches overall and the metal is 27 inches long the metal is approximately 5/8 inch on all 3 sides. The plastic piece on the one end is approximately 1 3/32 wide. I will need 8 of these.I also need the same thing except the length is 21 inches on the metal and 22 inches over ... (cont.)

Hello! I need to replace my 21" channel balancers for a single hung non tilt window. I look forward to hearing back from you. Jen

Hello, I'm looking to replace the channel balances in a Viking window I have. Looks like the part number is 2040 FD. It looks like the metal part is 21" long. If you measure the whole piece, including the plastic parts on the ends, it is 22-1/16" long. Let me know if you have the part. I would ... (cont.)

I am looking for two replacement balances. Stamp is 20CUSB. Photos are attached. I live in Canada, where can I purchase these?

need balances.

Need two sash balances and two 1.25 x .25 metal stoppers. There is a 20C stamped on the channels.

20 4 KP CALDWELL

I need to replace the balancers on my Milgard Vinyl window. The window is approximately 20 years old. sash weighs approximately 16 lbs, channel is 1/2" in width metal part of balancer is 21" long There is also a little plastic part that's 5/8" x 1/2". ( please see all pictures attached). Pleas ... (cont.)