Viewing all customer Discussions for:

S385-29 29" Series 385 Channel Balance

Hello, I have channel balances 29" long metal (not including plastic ends) I don't have window measurements, but I do have the screen measurements for that window: 31" tall and 49 1/2" wide. The only stamps in the channel metal that I can see are "28C USB". Please advise which channel balances ... (cont.)

The channel length is 29" (Not including end caps), width is 9/16"...and channel depth is 1/2" This is a large window....roughly 50" wide. Markings are 28F. It appears to have a 19-023 top and a 15-077 bottom...but your "wings" look wider than mine. On mine...total width of end pieces at wings is 15 ... (cont.)

Channel itself is 29" long Numbers stamped on channel #1 is 2830 BSI AR Numbers stamped on channel #2 is 2830 BSI AT I have one channel on the left side of the window frame and the other on the right I wish to purchase both sides.

Hi, I could use some help identifying the correct replacement window balances for my windows. I've attached several photos showing the old one. The total length of the metal frame is 29". This particular one is broken (thus the missing internal string pulley) but from what I've been able to gather o ... (cont.)

Do you supply replacement Sash Balances foe BSI products? I need 2 new sash balances. Please quote me.

Pic shown is 29 inches long. Have various lengths. Any help would be appreciated.Thanks, Keith

Please confirm with me that I need product number S385?29. My weight indicates option 2830. Thank you

1/2 inch channel, metal piece is 29inches long, with plastic ends 30 inches long

This is one broken balance, I also have another window,larger with the balances removed prior to my ownership

I have a single hung single pane window and need 2 springs. Number on the balence is Unique 28-C-30. Don't know the weight But the size is 52 wide by 31 high for the one panel.

Mine measures 29.5 - 30 from metal to metal, can I still use 29"?

Trying to get 2 balances for my kitchen window. the balance is 29inches from tip of metal to metal and 1/2 inch wide. Hope this can help.

29 inches long About .5 inches wide and thick. I think its s380 or s385 Wanted to check with you prior to ordering Will,send another inquiry about the sash guides and balance retainers. Thank you!

I am not sure what you call these plastic clips on the top of my windows but I am missing them on some of my windows and the windows do not attach to the WIndow Balances I purchased from you, S385-29. Can you please tell me what the window clip part is that I need to purchase to fix my windows? Than ... (cont.)

29" channel, 1/2" wide 28D stamp near shoe on channel

I have a number of windows in a professional office building that need to have the channel balances replaced. The building was remodeled in 1990 but the windows installed do not have the take out clips for securing the lifters. I think there must have been a special process that people use for rep ... (cont.)

I was attempting to repair a Simonton vinyl single hung window. The right side balance had come loose and was sitting in the window channel. The window still worked but was not smooth. I removed the sash and took out the balance. The balance appeared to be broken and a search for a replacement led m ... (cont.)

there are 2 of these.length is 28 7/8 without plastic ends. item is for impact windows

The metal is 29" long and I am looking 8 of these

stamped 28C USB my channel is 1/2" wide 29" long