Viewing all customer Discussions for:

S385-30 30" Series 385 Channel Balance

Hi, The Window Sash weighs 32 pounds. Length of the balancers is 30''. The top looks like 19-005 the bottom looks like 15-002. If I can't use a stock balance to replace those, how do I order 4 of those custom-made? Please advise asap. Thanks, Matt

This is for a single-hung window. I could not find any identifying markings, etc. Pictures are attached. Length 30" and width is 1/2". Thanks, Tom

I need to determine which SWISCO channel balance is the right replacement for my broken channel balance. The 4 digit code stamped on my channel balance is 2940 and the channel length is 30". Thanks.

Hi, I need to identify and order the attached channel balances in these pictures, : the measurements are 9/16" x 30" for the channel, 9/16" width on the top end piece and 7/16" width and 1" front to back on the bottom piece; the number stamped on the channel seems to be: 29C USB or 290 USB. Hope th ... (cont.)

I have pictures of the type balance I need but the spring is too strong. The window weights 30 pounds. The Id marking is 29 9 KW CMC 11 and the length is 30 inches. Can you suggest a replacement. I think the repair man used what ever balances he had on the truck. I have replaced many top sash guides ... (cont.)

I am need of two Kinco window balancers here are some pictures and the writing on the balancer says 29 6 1x cmc 9 please get back with me Mark

Hi please help me to replace these block and tackle window springs. I have attached pics also. 30" channel the window sash weighs 31 pounds. stamp on channel is - 29-6 IA2 cmc6 Thank You

I have several balances that no longer hold the window. Specifically, they do not catch the window at the low end of window. Do I need to replace the balances? Also, I have a few where the top piece has cracked off. Can you help? Image loaded shows a number on the base of the balance as 29 4 ... (cont.)

Balance Length (metal part): 30 inches -Markings on Balance: 29 6 JW CMC 11 -Weight of sash: 30 LBS (when I hold it in my hands while on scale) 32 LBS when I put sash on scale by itself

I need two channel balances for a Kinco window. There is no hard stamp on them but there is the code " 29 9 HW CMC 7" on the balances. They are 30" in length. It looks like a S351-30 channel balance. Thank you for your help!

I need to replace about 28 balance of different sizes. The window were manufacture by windowmaster in san diego in 1992. The number on this balance is 2970 BSI og 30. I would like to know what series they are so i can replace. I'm sending you some picture.

I have windows that need new channel (block and tackle) balances. Our local window parts place is apparently no longer in business, and I would like to see if you can help with replacement balances. They are marked as "29 6 HS Caldwell," are 1/2" channel that is 30" overall length, and the (non- ... (cont.)

I have a 30" channel balance for our NuAir windows (2005) marked 29-5 FA2 CMC 9 with two ends that do not seem to match the ones in the pictures.

Hi, I believe I have Kinco windows and am trying to find replacement channel balances. I have a series of windows throughout the house all of which are starting to have problems with the channel balance. The house is only 7 years old. I am beginning to understand why Kinco may have gone out of ... (cont.)

I am trying to replaced a few window channal balances in my house and I am having difficulty identifing the exact replacement balance. I have Kinco windows and my house was built in 2003. The balance is 1/2" by 30" long and the windows are non-tilt. The only markings on the balance is as follows: ... (cont.)

I'm needing to replace two (2) channel balances w/ top/bottom guides however, I cannot determine which ones I need based on the pictures or item numbers listed. I'm looking to replace a rolled-edge channel guide; 30 inches in length with "293" and "AJ" stamped on it (they are slightly seperated fro ... (cont.)

I have Kinco make single hung Aluminium Windows in my Highland home in Tampa. Some of the channel balancers have gone bad due to breakage of plastic top and bottom clips. I tried to find out suitable replacement balancers from your online catalogue but not sure of the match. Details of my e ... (cont.)

I have a Nu Air non tilt window, single hung that has a damaged channel sash balance. The damaged part has the following ID Number: #29 5 fw cmc 10 Can you help me identify and order the correct replacement part?

I have a Kinco Window that needs the balance Cart. replaced. The window is approx 6-7yr old. It has the markings: 29 3 EX CMC 11. The channel is 9/16 wide x 9/16 deep with hemmed edges and is exactly 30-in long. The top guide is similar to your 19-002 except that it has wings on the back li ... (cont.)