Viewing all customer Discussions for:

82-249 Sliding Glass Door Multi-Point Keeper

The inside door handle does not sit snug against plate. Wobbly. Latch is not snugg against plate.

Im not sure if I even have the right name for my missing part. But im missing the plate that the door closes and locks into on the inside of my sliding door frame. You can see in the second picture and im not sure what part to buy. Any advice or help will be appreciated!

I am looking for a replacement for the pictures I've attached. The mortise lock is approx. 12 1/2" in overall length, and approx. 12" from center to center of holes. There are two patten numbers stamped on lock, # 6.264.252 and # 5.820.170. The handles are 8 1/2" total length with bolt c to c of app ... (cont.)

Need a latch to lock our door. Please see pictures attached

i have a missing strike plate that is misssing for the lock in the above pictures

Anyway to identify this mortise latch from a pella sliding door

Hello, I am looking for a patio door keeper. The door has a multipoint latch and it looks like the original keeper had 5 screws (in the corners and in the center). I am not sure if there are other keepers that could be used. ideally, we would like a new lock cylinder as well so the exterior lock cou ... (cont.)

Looking for the catch mechanism for this Empire slider. Any chance you have the part?

Please help identify correct replacement door keyed handle set

Would like to know if lock in photos are your locks

Already removed lock from door... prior to knowing about this site. Need to rellace this lock on my slider door. It is at least 5-8 years old. Maybe closer to 10 & stopped unlocking sobi need to replace it. Please help!

Image #3135 above shows a black hole where our locking latch fell out. Not sure what it's called exactly. We have the interior and exterior handles in place and still operational but we cannot lock our door. Image #3137 above seems to be all there unless you see something wrong with it. I think ... (cont.)

there are 2 hooks on the latch that engage in the hardware on the frame. the bottom hook does not move down when the lever is pushed. pictures of latch attached. ( locking latch ) Thank you for help.

Thank you.

looking to find a replacement strike plate

Hello. I need a new door handle / lock throw for my slider. I have provided tape measure pics showing dimensions and mounting screw to screw spacing. Can you please help me identify a proper replacement for this? Ideally I would like a white finish on the metal hardware, as per the factory unit. I h ... (cont.)

I am looking to replace this Sliding Door Handle. Do I need to get the exact replacement or is there another Sliding Door Handle that will work? If there is another replacement do I need to replace everything? Thanks

We purchased this door through Lowe's around 2012. I believe the part number to replace the locking mechanism is 82-265 and if required (more than likely will just go ahead and replace) the "keeper" 82-249. Also would like to know the replacement part recommended for the Handles (inside and outside ... (cont.)

As inside handle part has been broken, I'd like to replace it.

The thumb lock broke on this patio door latch. I believe there are some parts that broke inside the strike bolt mechanism on the edge of the door. to describe the parts the side handle is 22 inches long and 1 1/4 inches wide at the base. The door piece on the edge of the door is 11 11/16 long and th ... (cont.)