Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

Mercer aluminum casement window. The arm is loose and keeps falling down and out of the notch in the track on the bottom of the window. On the arm is stamped "Wright" in cursive. On the bottom where the screw holes are it says "7701". Arm is approx 7 7/8" on longest portion. Arm is 1/2" wide. ... (cont.)

need replacement parts for casement window per the following note -- 2 of the master bedroom casement windows had individual issue. The pictured casement window needs to have the casement window handle proper attached, secured to the pictured window casement window operator, and the casement window ... (cont.)

I accidentally broke off the handle to my window opener. I'm in need of your help to identify a replacement part for my window opener. My control arms are still in good shape I just need the actual crank assembly.

I have 4 windows....need four left and 4right (side frame) lock (8 total) and 2 right and2 left for (bottom frame) sill crank (4 total) (at least I think that's what they're called...)ThanksLinda

I believe I'm needing a casement operator & crank. Both seem to be stripped and I'm thinking this model 39-028E might be correct. It is a Norco window from 2000 & the hardware is marked 'Truth'. Can you direct me to be sure? Thanks!

I need a few of these. And I need some missing handles. Bronze maybe oiled bronze color Thanks RickI also need some for another type of window see photos

Just purchased a 1963 house in Eugene, OR and it has most of the old wooden casement windows. The wood is in good shape and the mechanisms are intact but many of the cranks are stripped. I would rather not replace the entire operator because there are many layers of paint and the install looks non ... (cont.)

at first 1 thought 39-155 would work, there is no elbow on short link in my mechanisms - very "handy person" Thanks!

Hi. I need to replace a Truth 45251 casement window operator with 9.5" arm (40049 stamped on arm). The distance between the outer screw holes is 3". The crank assembly (without arm) is 4" wide, 2.75" deep and 11/16" high. It looks like you have two possible parts that will work: 39-365/366 and 39-02 ... (cont.)

You guys have the exact part I need but it's too short. You have a Caradco window crank - Product Code 39-028. It has the screw holes in the correct place and everything but it's too short. Can you help me find the exact part with a longer straight arm? Or can you help me identify the manufacturer ... (cont.)

I have a home that was built in the 80's and the seals and cranks are wearing, windows are still in good shape. i have a number of cranks that are 7 1/2" long and shorter arm is around 4 1/2" The outside seals are hard and gone but the few that are let are a dome seal "D" Can you assist in getting ... (cont.)

The window cranks are stripped and will operate properly. The attached pictures are what type they are, they're the original builder windows. The arm is 8 inches long from the bend of the are to the end that connects to the underside of the window. Do you have a replacement for these? Do you need ad ... (cont.)

The handle and the casing are stripped so the complete assembly needs to be replaced.

I need help finding the right track for the new window casement operator OR a new window casement operator that will fit the exciting track. Thanks

Hello , I?m in a patriot home and need a replacement casement window crank. Can you please help with this ? I need one for the left window crank . The inside retangle housing is about 4 inches by 1 inch .This window does not open anymore so I have also included pictures of the right window crank . ... (cont.)

Hello,I am looking for help fining a casement operator in white for a Norco window 076-N-330 Right hand crank.Please advise.ThanksScott

About 8.5 to 9 inches. But it has a 45 turn at the end. Not straight. Does that matter? also markings show Truth and 94004

I ordered part numbers 39-094 and 39-095 to replace a right and left hand casement window mechanism as shown in picture. The picture includes one of the parts I received and as you can see there are some differences. Do you have a suggestion for another part to try?Thanks.Jesse

My window is ~16 years old, a Norco Windows, D series Clad Case/Awn, 076-N-330 is inoperative. The mechanism inside the crank box is stripped. I have removed the crank handle and tried to rotate the crank mechanism and it will not work. We need a new crank box. I have a handy man who can assist ... (cont.)

I need a replacement Truth operator with crank to fit this window. It should be a dark color as shown in the photo rather than white. I cannot reattach the crank handle and the entire inside fell off. I cannot close the window completely. Photos are attached. Also can you recommend a local inst ... (cont.)