Viewing all customer Discussions for:

82-259 SS Multi-Point Mortise Latch and Keeper

Hello trying to id this lock it's 9/16 wide and measures a little less then 10" from gold screw to screw

The lock in your diagram 82-265 does not match my existing lock. But the keeper 82-249 matches mine. My lock is smaller. The white cover plate measures 9 and 5/8 . The lock body measures 10 and 1/8 on the face where it attaches to the cover plate. Would that size be available?

I have a sliding patio door. Ali-ADW-8 ATM 2190 ARG. The mortise lock has broken, and needs to be replaced. Please assist. If needed, i will also purchase a new faceplate and door hardware. Thank you.

We need a latch for our patio door. Top to bottom is 9" 5/16. Do you have any?

Sticker says ALI ADW-8 ASIM 2190-ARG, Make Date: 01/27/2016, Salesorder: 07265883, Warranty 28237520 The locking mechanism has failed. Need new internal Lock.

Looking for a two point door lock sliding doorMy name is Ed thank you

I have a 82-259 mortise lock. Which keeper,or striker plate is the one I need?

Hi i need to replace this lock with a keyed one. i need to lock from outside , thank you

I need to replace a door lock for an Atrium model #719801229540. The measurements look like either the 82-259 or the 82-239 part numbers from your website. Can you tell me the difference and which one might fit my door?

Hi there, We had new Traco windows installed in 2003, and they are now out of business. The lock broke on our patio door and it looks like your part would fit: SS Multi-Point Mortise Latch and Keeper, Product Code: 82-259. Do you know of other Traco window owners who have had success with your repla ... (cont.)

To whom it may concern, we need to replace our doorhandles on two of our 12 foot sliders. Here are pictures of the overall, inside, outside and each slot. Regarding dimensions, here is what I was able to measure: Inside handle length is 8 3/8 inchesInside screw hole length is 3 15/16 inchesOutside h ... (cont.)

Here are the photos. Please let me know if you need more details. Looks like product codes: 82-259 or 82-239, however, it looks like my measurement from each bolt is around 5 3/8 and not 5 5/8. Also the top slope is different.

I am trying to identify the proper multi-point mortise lock for my sliding glass door. I have identified my keeper as your part number 82-249. And, based on the dimensions shown on your website, it looks like both 82-259 and 82-239 will match up to mine. What is the difference between those two l ... (cont.)

The Patio Door is fairly new (Double Pane) and has a Vinyl Frame. All that I have is the Handle with a 3-7/8 Hole Pattern and the keeper plate that has a an overall length of 9-5/16 and width of 9/16. It has a double mortise hooks that are spaced 5" apart. In the door jam the Vinyl Strike Plate has ... (cont.)

Hello, I have a double latch lock that I need to replace on my sliding glass door and was hoping you could assist in which lock would work best. 82-259 looks to be the one that would work but I wanted to make sure. Thank you!

I am trying to find a similar latch for my sliding door. I ordered this item [(1) 82-259 : SS Multi-Point Mortise Latch and Keeper] and it was incompatible. Please see attached the pictures for reference.

Looking for a locking mechanism for my sliding glass door. I think it looks like the 82-259 part but unsure. Thank you, Angela

Items:82-086 Legacy Keyed Handle Set, 3-15/16" (1-1/8" to 2-1/2")82-249 Sliding Glass Door Multi-Point Keeper82-265 Multi-Point Mortise Lock with Face Plate, 11"

Internal mortise lock is just shy of 12" The total of 4 holes for handle is 4" I am missing handle to this.

My mortise lock is broken, and looks like the 82-259 is the one I need. how do I remove and replace it? Is there a quide showing how do this?