Viewing all customer Discussions for:

26-420 Tilt Window Latch, Right Hand

Top Overall length 2 11/16" Top Overall width 11/16" Thickness 3/8" Slide width 1/16" Bottom length 2 5/8" Bottom width 9/16" Latch protrusion 3/8"

Both of the pivot bars broke as we went to clean the windows. I looked on your web site at the pivot bar section and did not see this type of pivot bar. I hope that you have it. The pivot bar is estimated to be a length of 3 in long, with the pivot foot being 3/8 in wide. The thickness appears ... (cont.)

Do you carry these clips that hold the window into the window track and allows you to tilt window in

I have vinyl replacement windows--the tilt latch doesn't seem to fit any measurements i find--no brand name on anything. seems to be good windows--35 years or so with no gas leaks. I will give my gage readings of measurement because it will be exact in INCHES. the rectangular top is 2.68 long x . ... (cont.)

Could I please get a quote for 1 set (2 balances) of S795-33 (33C Option) with a 15-194 shoe and a 62-106 Hook attached please? Also on the Q to order all at once please 26-201 (2) 26-420 (1) 26-419(1) Thank you

Slider of right latch broke - can't open window to replace slide latch. Please advise - unable to force it to slide by prying with flat head screw driver. Don't want to break anything. Just ordered part. Thanks! Tilt Window Latch, Right Hand Product Code: 26-420

Based on my search, I am not sure about the difference between # 26-419 and # 26-243. Please make your recommendations based on information I have provided. Thanks for your excellent assistance, RC

I AM IN NEED OF THE RIGHT TILT WINDOW LATCH FOR A SIMONTON REFLECTIONS 5500 BUILT BY AMCRAFT. CAN YOU HELP WITH THIS PLEASE? THERE IS 2 THAT ARE CLOSE 26-244-243 AND A NOTHER I DON'T RECALL THE PART NUMBER...

I need 2 right and left window latch replacements for windows placed in 1987. I'm thinking the size is 2 5/8 x 11/16 I'm thinking I need the 26-419 and 26-420. Is this correct?

Hello. The photos show an Anlin window part with a broken spring. I included a photo of the same part intact/unbroken as well.

Hi Folks, I am looking to replace the latch on several of my tilt window. I first went to Home Depot and purchased their latches which measure 2 7/8" x 3/4". They are a bit too long and bit too wide. Please see my attached photos. I am guessing I want parts 26-419 and 26-420. Do you agree? ... (cont.)

I would like to replace the broken external tilt latch for Series: 5000 Double Hung, Type: VSDH, Code DVW - K - 7 window. Pictures attached. I would like 3 right and 3 left replacements.

Need a pair of tilt latches. Can't identify make or model of window. Your 26-419 and 26-420 seem to be closest match, but ours has a curved latch mechanism. Pic is of another identical window that is not broken.Maybe the following info will help you identify the window----Pivot bar 26-403 was a perf ... (cont.)

Please confirm tilt window latch #26-419 & 26-420 will fit 15 year old TRACO windows. The dimensions appear to be in-syce with your schematic drawing. Thanks - Dan

Please let me know the value of slide in groove. My window frame is about 2mm thick.

I'm looking for a replacement latch for my left "Boreal" window latch. 2"Length x 0.5"Width. Can I also request a right latch too?

Please see photo

The part has a number 11 inside of it